QTimer does not emit timeout.....

[VRonin]

do you have an event loop running in that thread (QThread::exec was called)?

[A Former User]

@VRonin Yes. In fact the code posted is running inside that thread.

The object where the code lives has been moved previously to the thread that this->thread() make reference.

Uldfilterproject::Uldfilterproject(QObject* parent) : 
    QObject__(parent),
    m_pGrab(nullptr),
    net({"192.168.1.5",8989}),
    m_worker(new UldWorker())
{
    
    /* Change worker threads */
    m_worker->moveToThread(&m_thread);

    /* Now Connect signals, with a queue: why? this object and m_worker live in different threads now :) */
    connect(this,&Uldfilterproject::awakeWorker,m_worker,&UldWorker::uploadStart_WORKER,Qt::QueuedConnection);
    
    /*Start the thread */    
    m_thread.start();
    
    /* Start */
    emit awakeWorker(net.m_hostName,net.m_port);

The uploadStart_WORKER slot is queued executed when I emit awakeWorker.... inside that slot I ran:

void UldWorker::uploadStart_WORKER(QString hostName, quint16 portNumber){
 QTimer * t = new QTimer(this);
    
    /* Timer dot */
    connect(t,SIGNAL(timeout()),this,SLOT(dotDisplay()));
    t->start(10000);
    
    qDebug()<<"t thread is:     "<<t->thread();
    qDebug()<<"this thread is:  "<<this->thread();

[VRonin]

Can you post the code around where you create the object referenced by this?

[A Former User]

@VRonin I did it.... please check the previous post as it is edited.

[VRonin]

Yes, sorry you anticipated me with the edit. What's the type of m_thread? can you use Qt5 connection for QTimer too?

[A Former User]

@VRonin The m_thread object is a Qt's QThread.

[VRonin]

did you try Qt5 connection on the timer? (or in other words are you sure dotDisplay is declared as slot)?

[A Former User]

@VRonin Indeed:

class UldWorker:public QObject{
    Q_OBJECT
public:
    UldWorker(QObject * parent = 0);
    ~UldWorker(){}

public slots:
    void uploadStart_WORKER(QString hostName, quint16 portNumber);
private slots:
    void dotDisplay();
private:

};

However I guess I'm doing something awfully wrong.....

My UldWorker object is as well as the timer in the same thread:

http://doc.qt.io/qt-4.8/images/threadsandobjects.png

Let's suppose Obj5 is my UldWorker and Obj6 is my timer. They are indeed in the same Thread. So signal and slot connection can be done directly.

But according to documentation:

In multithreaded applications, you can use QTimer in any thread that has an event loop. To start an event loop from a non-GUI thread, use QThread::exec(). Qt uses the timers thread affinity to determine which thread will emit the timeout() signal. Because of this, you must start and stop the timer in its thread; it is not possible to start a timer from another thread."
http://doc.qt.io/qt-5/qtimer.html

I'm sure the new thread was started by means of QThread:exec(), why because I called m_thread.start()and according to docs:

void QThread::start(Priority priority = InheritPriority)

Begins execution of the thread by calling run(). The operating system will schedule the thread according to the priority parameter. If the thread is already running, this function does nothing.

void QThread::run()

The starting point for the thread. After calling start(), the newly created thread calls this function. The default implementation simply calls exec().



http://doc.qt.io/qt-5/qthread.html

As m_thread is basically a non reimplemented QThread class..... It is a QThread.... the default implementation of run, is called when I did m_thread.start() , so exec() was called. The event loop was initiated.

This is the whole implementation of the slot which runs in the new thread:

void UldWorker::uploadStart_WORKER(QString hostName, quint16 portNumber){
    

    qDebug()<<"Connection Manager Thread";
    
    QTimer * t = new QTimer(this);
    QTcpSocket * s = new QTcpSocket();
    QTimer * t = new QTimer(this);
    
    /* Error Handling */
    typedef void(QAbstractSocket::*QAbstractSocketError)(QAbstractSocket::SocketError);
    connect(s,static_cast<QAbstractSocketError>(&QAbstractSocket::error),this,&UldWorker::errorNotify);
    
    /* State changed */
    connect(s,&QAbstractSocket::stateChanged,this,&UldWorker::socketStateDisplay);
    
    /* Timer dot */
    connect(t,SIGNAL(timeout()),this,SLOT(dotDisplay()));
    t->start(10000);
    
    qDebug()<<"t thread is:     "<<t->thread();
    qDebug()<<"this thread is:  "<<this->thread();
    while (m_alive){
        QAbstractSocket::SocketState ss;
        ss = s->state();
        if (!m_qi.isEmpty()){
            /* Si hay al menos una imagen */
            if (ss == QAbstractSocket::UnconnectedState){
                /* Si no está conectado el socket Conectarse */
                //qDebug()<<"Attempting Connection";
                s->connectToHost(hostName,portNumber);
                s->waitForConnected();
                //t->setInterval(1000);
                //t->setSingleShot(false);
                qDebug()<<t->remainingTime();
                continue;
                
            } else if (ss == QAbstractSocket::ConnectingState){
            } else if (ss == QAbstractSocket::ConnectedState){
                /* Stop pending connection timer */                
                t->stop();
                
                
                /* Si el socket está conectado, enviar la información */
                /* pop from q and sent Information */
                QImage i = m_qi.dequeue();
                continue;
            } else {
                /* Socket is doing whatever I don't care */
                continue;
            }
            
        } else {
            
            if (s->state() == QAbstractSocket::ConnectedState){
                /* So there's no workload, free connection */ 
                s->disconnectFromHost();    
                continue;
            }
        }
    }
    
    s->disconnectFromHost();
    delete s;

}

[VRonin]

you are defining QTimer * t = new QTimer(this); twice

could you try and change

connect(t,SIGNAL(timeout()),this,SLOT(dotDisplay()));
    t->start(10000);

into

connect(t,&QTimer::timeout,this,&UldWorker::dotDisplay);
t->setInterval(10000);
QMetaObject::invokeMethod(t, "start",Qt::QueuedConnection);

[A Former User]

@VRonin Thank you. Well timer is running, i did this:

void UldWorker::uploadStart_WORKER(QString hostName, quint16 portNumber){
    
    qDebug()<<"Connection Manager Thread";
    m_alive = true;
    
    QTcpSocket * s = new QTcpSocket();
    
    /* Error Handling */
    typedef void(QAbstractSocket::*QAbstractSocketError)(QAbstractSocket::SocketError);
    connect(s,static_cast<QAbstractSocketError>(&QAbstractSocket::error),this,&UldWorker::errorNotify);
    
    /* State changed */
    connect(s,&QAbstractSocket::stateChanged,this,&UldWorker::socketStateDisplay);
    
    /* Timer dot */
    connect(t,SIGNAL(timeout()),this,SLOT(dotDisplay()));
    t->start(10000);
    qDebug()<<"Metatest:"<<QMetaObject::invokeMethod(t,"timeout",Qt::AutoConnection);
    qDebug()<<"t thread is:     "<<t->thread();
    qDebug()<<"this thread is:  "<<this->thread();
    while (m_alive){
        QAbstractSocket::SocketState ss;
        ss = s->state();
        if (!m_qi.isEmpty()){
            /* Si hay al menos una imagen */
            if (ss == QAbstractSocket::UnconnectedState){
                /* Si no está conectado el socket Conectarse */
                //qDebug()<<"Attempting Connection";
                s->connectToHost(hostName,portNumber);
                //s->waitForConnected();
                //t->setInterval(1000);
                //t->setSingleShot(false);
                qDebug()<<t->remainingTime();
                continue;
                
            } else if (ss == QAbstractSocket::ConnectingState){
                if (!t->remainingTime()){
                    dotDisplay();
                    t->start(10000);
                }
            } else if (ss == QAbstractSocket::ConnectedState){
                /* Stop pending connection timer */                
                t->stop();
                
                
                /* Si el socket está conectado, enviar la información */
                /* pop from q and sent Information */
                QImage i = m_qi.dequeue();
                continue;
            } else {
                /* Socket is doing whatever I don't care */
                continue;
            }
            
        } else {
            
            if (s->state() == QAbstractSocket::ConnectedState){
                /* So there's no workload, free connection */ 
                s->disconnectFromHost();    
                continue;
            }
        }
    }
    
    s->disconnectFromHost();
    delete s;

}

So in the part

if (ss == QAbstractSocket::UnconnectedState){
                /* Si no está conectado el socket Conectarse */
                //qDebug()<<"Attempting Connection";
                s->connectToHost(hostName,portNumber);
                //s->waitForConnected();
                //t->setInterval(1000);
                //t->setSingleShot(false);
                qDebug()<<t->remainingTime();
                continue;
                
            } else if (ss == QAbstractSocket::ConnectingState){
                if (!t->remainingTime()){
                    dotDisplay();
                    t->start(10000);
                }
            } else if (ss == QAbstractSocket::ConnectedState){
                /* Stop pending connection timer */                
                t->stop();
                
                
                /* Si el socket está conectado, enviar la información */
                /* pop from q and sent Information */
                QImage i = m_qi.dequeue();
                continue;
            } else {
                /* Socket is doing whatever I don't care */
                continue;
            }

When in ConnectingState, I checked if the timer is done, and manually call the slot. That's how I know the timer is running and behaves as much as I want. I follow your suggestion of invoking, but rather than invoke the start signal of the timer I did it with the timeout one, and indeed the slot was called.. I used an AutoConnection because timer and this object (uldworker), both live and operate in the same thread.

So this way it behaves as needed... Im making a "dot waiting for connection" for debugging purposes (all this for debugging sake).
I'd like that it works by triggering automatically the dotDisplay slot, but seems I have tho check this manually.

---

After that I also made what you suggest, of testing start slot, and it returned true.... So I think the case for nonrunning timer is that timer is running.

[VRonin]

Ok, found the issue here, the problem is with while (m_alive) if the loops keep running the thread event loop will never have the chance to trigger slots from signals. You can fix it either by changing design (make it asynchronous) or adding QCoreApplication::processEvents just below the while

while (m_alive){
QCoreApplication::processEvents();
// the rest

[cscsaba4]

@VRonin Could you suggest any good practice to replace a while loop? In my case, I start a thread by moving my QObject into a QThread instance. The worker only has a single-shooting timer and a while loop that checks a given requirement as long as the timer is running (termination condition). If the condition is true, the timer is stopped, thus preventing timer firing and calling the connected slot.
Until I read your comment I had the same problem as OP. Adding QCoreApplication::processEvents below while solved my problem, but I'm curious, which one of your suggested solutions is the better practice and how could the while loop be replaced.

class Worker(QObject):
    finished = pyqtSignal()
    error = pyqtSignal()

    def __init__(self, port, parent=None):
        super(Worker, self).__init__(parent)
        self.port = port
        self.portData = port.portData
        self.getPosition = port.getPosition

    def process(self):
        timer = QTimer(self)
        timer.setSingleShot(True)
        timer.timeout.connect(self.portData.sender.pulseSignal)
        timer.timeout.connect(self.printFiring)

        timer.start(self.portData.retention)
        while timer.isActive():
            position = self.getPosition()
            if position < self.portData.start or position > (self.portData.start + self.portData.window):
                self.timer.stop()
        self.finished.emit()

    def printFiring(self):
        print("timer fired")

[VRonin]

move the check to a different method

I'll try to write python but I'm not proficient with the language.

class Worker(QObject):
    finished = pyqtSignal()
    error = pyqtSignal()
    def __init__(self, port, parent=None):
        super(Worker, self).__init__(parent)
        self.port = port
        self.portData = port.portData
        self.getPosition = port.getPosition
        self.timeoutTimer = QTimer(self)
        self.timeoutTimer.setSingleShot(True)
        self.timeoutTimer.timeout.connect(self.positionFinished)
        self.checkTimer = QTimer(self)
        self.checkTimer.setSingleShot(False)
        self.checkTimer.timeout.connect(self.checkPosition)
    def process(self):
        self.checkTimer.start(100)
        self.timeoutTimer.start(self.portData.retention)
    def checkPosition(self):
        position = self.getPosition()
        if position < self.portData.start or position > (self.portData.start + self.portData.window):
            positionFinished()
    def positionFinished(self):
        self.checkTimer.stop()
        self.timeoutTimer.stop()
        self.portData.sender.pulseSignal()
        self.printFiring()
        self.finished.emit()
    def printFiring(self):
        print("timer fired")

checkTimer will check 10 times per second the position while timeoutTimer holds a process timeout. Whenever the position condition is satisfied or the maximum timeout is reached positionFinished is called

[cscsaba4]

@VRonin That's a very nice idea, thank you for your reply!