Need a little help with QPushButton & connect

mrjj

@mrmorph
well was just a note. the real issues is why connect fails.
can you try the new syntax
connect(button1, &QPushButton::released, this, &myFirstPlugin::doThis);

mrmorph

Visual Studio does not like that.

For connect there is a 'no instance of overload function "myFirstPlugin::connect" matches the argument list......'

And &QPushButton::released is inaccessible...

BTW, I am using Qt 4.8.1 as that's what Daz Studio is using.

Sorry about the slow replies, it's not letting me post as I am a noob. Some 500 second limit.

mrjj

@mrmorph
oh. sorry. thought it was 5.0+
forget new syntax then.

since connect fails , there must be something wrong.
but all seems fine.
doThis is public slot. buttons1 is allocated.
just so I 100% sure , can u try the released signal instead?
connect(button1, SIGNAL(released()), this, SLOT(doThis()));
and see if still say "not works"

np. its spam protection but is indeed annoying sometimes.
ps. QMessageBox* box = new QMessageBox();
need a delete box; else its a leak but ok for now.

mrmorph

No problem, I should have mentioned I was on an older Qt.

Same thing with released().

Thanks for the tip about the MessagBox delete, someone else did mention it, but it was always just a temporary thing.

I wonder if I have to hook into something else that's in Daz Studio.

Just as an example, the sample I am working from as reference uses connect like this :

connect( dzScene, SIGNAL(sceneLoadStarting()), this, SLOT(blockRefresh()) );

Now it also has this include :

#include "dzscene.h"

The scene would be the main graphics window and other things. Perhaps there is some loop being started in there because it uses dzScene in the connect, not a widget or anything like I am using.

Maybe I need to include another library to get the loop for the widgets.

Just grabbing at straws.

mrjj

@mrmorph said:

connect( dzScene, SIGNAL(sceneLoadStarting()), this, SLOT(blockRefresh()) );

On the signal sceneLoadStarting call blockRefresh
so that is very like button.
Do you have access to a dzScene instance? Like the default scene ?
you could try to hook it up with your doThis and then load new scene or what ever
that signal means.

Whole SDK seems to be build with Qt so might have global event loop for plugins.
So I doubt you need anything else since it loads DLL.

But I don't like that connect fails. as even no event loop, the connect should not fail
as far as I know .
But syntax seems fine. so I wonder.

When you click on button, it does animate ? Meaning show being pressed ?

Also the default examples do work? I assume they use some gui too?

also, could you move connect over "showpane"
I assume pane shows then it says "not work" while pane is shown?

mrmorph

Not sure about that signal, I had a look through what's in dzscene.h and it all seems to be to do with loading models, cameras and the general interface.

I wondered if it might have a global loop too, that makes some sense to me.

The button animates yes and the radio boxes work too.

"also, could you move connect over "showpane"" - Nope, still does not work....

http://i799.photobucket.com/albums/yy275/Rogad/hmmm_zpseuusbmw5.png

The samples given in the SDK work yes. There's only one that really does what I am trying to do. Basically it just shows details about what's in the scene, like polygon count and things like that. There's a sort of tree structure that you can use to select models in the scene. Unfortunately it does not have any buttons or similar for me to work by.

The sample that works with connect uses QTextBrowser and it clearly seems to connect okay as it works - when you click on something in the scene you get the details updated.

mrjj

@mrmorph
Ok,i'm 99.9% sure that event loop is running as
MessageBox can be clicked and button animate etc.

Also, if you make a normal qt project, it just works? Im asking if you setup Visual Studio so it runs the
extra moc tool. etc. As moc.exe makes slot / signals work.
But if normale example works, I guess all fine in setup.

QMetaObject::connectSlotsByName(this);
Is that from sample?
Not that is should do anything bad.

have you tried to hook up anything else? like the radio buttons?
I am out of ideas why button wont work. seems perfectly fine.
Normally one can see a warning in Creator, application output when connect fails.
but with DLL, im not sure as it is not run in creator.

mrmorph

I can't run this as a normal Qt project, it just own't work standalone. But I will make a new project in Qt Creator and make a form to see how the buttons work and what code it makes. Maybe I can use that.

I did use QtCreator a bit though to start it off. There is a moc file, but I don't know what to do with it, not sure how to add the moc file to Visual Studio Express. Maybe that's it.

QMetaObject::connectSlotsByName(this); - no sorry that should not be there, that was from an earlier attempt, I have removed it now, but it had no effect anyway.

I tried to get radio buttons to work too, but they would not either.

I think you might be onto something with the moc file - I wasn't sure if I even needed that. I am using Visual Studio Express, so I'll have to find out how to use moc files then and try that.

mrjj

@mrmorph
aha, studio express. so you are not using the qt plugins.
Im not so deep into using visual studio but I know sometimes its need to manually add compile step to run
moc.exe tool that generate meta info for qt signal system etc.
.
Test by 1:delete all moc files. and clean build folder.
then rebuild all. if moc files comes back, all ok. if not
then its using the moc file from long time ago and might not know about your slot. (dothis)

http://stackoverflow.com/questions/15465932/using-qt-with-visual-studio-without-add-in

Note: Im not 100% in what cases moc are run as using creator its automatic.

its just a tool so you can run it by hand
http://doc.qt.io/qt-5.5/moc.html

if its not running moc.exe, it would explain the strangeness :)

mrmorph

Ok thanks I'll give that a go then.

I need to get some sleep, so I will do it tomorrow.

Many thanks for taking the time to help me, it's much appreciated :)

Take care,

Rog.

mrjj

@mrmorph
well same here.
My money is on moc files :)
you are welcome.
Take care too

Just for test i used your code as QDialog and button just worked
http://postimg.org/image/7rjevwz15/

JKSH

@mrmorph said:

I think you might be onto something with the moc file - I wasn't sure if I even needed that. I am using Visual Studio Express, so I'll have to find out how to use moc files then and try that.

You definitely need moc. All of the features listed at http://doc.qt.io/qt-5/metaobjects.html (including signals and slots) require moc to work.

VS Express is rather limiting. What version of VS are you using? Are you able to switch to Visual Studio Community Edition instead? If so, you'll be able to use the Qt Visual Studio Add-In, which makes your life much much easier. See http://doc.qt.io/vs-addin/

Or, even better, could you use Qt Creator to develop your plug-in? Qt Creator can use the Visual Studio compiler.

mrmorph

I thought what the heck I will spend a minute seeing what was going on.

Like I said I started building it in Qt Creator, then moved it over to Visual Studio, but kept it all in one folder.

So I remembered I could load it all up in Qt Creator still. So I re-built it in Qt to get the C++ source files and then I built those in Visual Studio.

Anyway, Qt Creator rebuilt the moc and it worked :)

http://i799.photobucket.com/albums/yy275/Rogad/misc/yay_zpsabp2qac2.png

So big thanks to you for narrowing it down to this. I have to remember to get Creator to rebuild the moc file when I add slots.

Very happy, thank you very much :)

EDIT : Ahh and I see you got it to work right too.

Hi JKSH,

Thanks for that. Yes I am using Community, sorry I've been using the name Express for so long, I just auto-typed it.

And I am using Qt Creator as mentioned above. I'll take a look at the Qt Visual Studio Add-In tomorrow, thanks.

Cheers both, so nice to nail that one.

mrjj

\o/
it was a sneaky one :)

mrmorph

@JKSH said:

Qt Visual Studio Add-In

HI again, just tried this but it says it did not find anything compatible. I tried the Qt4 version because I am using Qt 4.8.1 and I tried the Qt5 version but neither install. Perhaps I downloaded the wrong ones.

Also, I can't figure out how to make this topic solved.

Many thanks.

mrjj

@mrmorph
hi
use the Topic Tools button to mark as Solved.
its sort of below topic (first one) and to the right.

mrmorph

Yep tried that, all I see is this...

http://i799.photobucket.com/albums/yy275/Rogad/hmm_zpsgkxjvof6.png

mrjj

@mrmorph
hi its not the gear
its near reply button and sort by.

mrmorph

Got it, sorry I was looking in the wrong place, thanks.

mrjj

@mrmorph
well you are NOT the first to not see it.