[Solved] Qt creator doesn't compile with MVSC

N.Sumi

Hi Reezeus ,

Try this.

Set Qt Dir : C:\Qt\5.5\msvc2013_64
Path : C:\Qt\5.5\msvc2013_64\bin

reezeus

Hi N.Sumi

Thanks.

I have changed the path:
http://img11.hostingpics.net/pics/544654enVar2.png
http://img11.hostingpics.net/pics/862774enVar3.png
But nothing changed. Actually those paths don't even exist in my C:\Qt folder:
http://img11.hostingpics.net/pics/997416QtFolder.png

N.Sumi

hi,

I don't know, why you Qt folder looks differently. Please check the path.I am confused little bit, have you kept Qt5.5 in the Qt 5.4? I prefer copy the Qt5.5 separately out side Qt5.4. In Qt 5.5, you will have mvsc 2012 & mvsc2013_64. Make path to mvsc2013_64. Can I know the package , actually you are using.

Qt Open source installation: http://www.qt.io/download-open-source/#section-2 (for you, windows host: Qt 5.5.0 for Windows 64-bit (VS 2013, 650 MB)
http://www.qt.io/download-open-source/

N.Sumi

In my case it is..
http://www.hostingpics.net/viewer.php?id=556817Capture1.png
http://www.hostingpics.net/viewer.php?id=465717Capture2.png
http://www.hostingpics.net/viewer.php?id=685417Capture3.png

reezeus

I'm using Qt 5.5 now. I was working with version 5.4 but this morning I uninstalled it, downloaded the open source package "Qt 5.5.0 for Windows 64-bit (VS 2013, 650 MB) " and installed it (just a try when you are desperate...); and so the Qt installed in this folder:
http://img11.hostingpics.net/pics/612927QtFolder1.png

And here are the subfolders:
http://img11.hostingpics.net/pics/158005QtFolder2.png
http://img11.hostingpics.net/pics/776405QtFolder3.png
http://img11.hostingpics.net/pics/238824QtFolder4.png

N.Sumi

okay..
If you are using Qt5.5 now, then the path is

Set Qt Dir : C:\Qt\QT5.5.0\5.5\msvc2013_64
Path : C:\Qt\QT5.5.0\5.5\msvc2013_64\bin

reezeus

Done, but nothing changed. I have run qmake again then try to build but it shows the same error message, at the same line of the Makefile.

JKSH

Hi @reezeus,

I have installed MSVC 2013 + the Qt Add-in for MSVC.

If you use Qt Creator as your IDE, then you don't need the Add-In. That's only for people who want to use Visual Studio as their IDE.

Uninstall the Visual Studio Add-In.

I have setup two new environment variables, QTDIR & QMAKESTEP:
http://img11.hostingpics.net/pics/868264enVar.png
I have edited the PATH Variable to add this:
http://img11.hostingpics.net/pics/511359enVarPath.png

Remove these. They are not necessary, and they can cause problems.

You don't need to set QTDIR or QMAKESPEC. You also don't need to add Qt to your PATH.

But it says there is not debugger setup:
http://img11.hostingpics.net/pics/404071debugger.png

Download and install Debugging Tools for Windows from the Microsoft website.

(Note: A debugger is very useful, but it's not strictly necessary. You can build and run programs without a debugger.)

And when trying to build (after running qMake), it shows the following message:
http://img11.hostingpics.net/pics/270722errorMsg.png

And line 711 is the following:
C:\Qt\Qt5.5.0\5.5\msvc2013_64\bin\moc.exe $(DEFINES) -D_MSC_VER=1800 -D_WIN32 -D_WIN64 -IC:/Qt/Qt5.5.0/5.5/msvc2013_64/mkspecs/win32-msvc2013 -I//londc1/homes$/azzouz/GRM_DM -IC:/Qt/Qt5.5.0/5.5/msvc2013_64/include -IC:/Qt/Qt5.5.0/5.5/msvc2013_64/include/ActiveQt -IC:/Qt/Qt5.5.0/5.5/msvc2013_64/include/QtWidgets -IC:/Qt/Qt5.5.0/5.5/msvc2013_64/include/QtGui -IC:/Qt/Qt5.5.0/5.5/msvc2013_64/include/QtANGLE -IC:/Qt/Qt5.5.0/5.5/msvc2013_64/include/QtSql -IC:/Qt/Qt5.5.0/5.5/msvc2013_64/include/QtCore -I. ..\GRM_DM\mainwindow.h -o debug\moc_mainwindow.cpp

I think the Makefile reader doesn't like the '$' in your folder name (homes$). Move your files to a different folder (which doesn't have '$' in its name) and try again.

reezeus

Hi JKSH

Thanks for your advices. I followed everything (deleting Paths, uninstall MVSC add-in and install Debugging tool for windows which is now recognized by Qt creator).
I have then created a new project and locate it in another drive/folder where there's no dollar sign (folder in the desktop basically).
the debugger doesn't show the error message relative to the Makefile, but it throws lots of errors (All the same) saying it cannot find my .obj files:
http://img11.hostingpics.net/pics/804880errorObjFiles.png

the "imp_blpapi_Event_release" things relate to the bloomberg API I'm using. However the file not found (and all the others) relate to class that I have written, like "workerIndexData" in the screenshot.

I have checked the forum before posting, there's an accepted answer that suggests to clear manually the folder "build-GRM_DMGT-Desktop_Qt_5_5_0_MSVC2013_64bit-Debug", then run qmake again and rebuild. I've done this but it doesn't change anything.

JKSH

You're welcome :)

@reezeus said:

it throws lots of errors (All the same) saying it cannot find my .obj files:

Ok, that means your compilation finished successfully, but the next step (linking) failed.

Those message don't mean that the system can't find your .obj files. Instead, it means that your .obj files need to access functions/variables from your Bloomberg library (these are the "external symbols"), but the system can't find your Bloomberg library.

In your .pro file, you must specify where to find your Bloomberg library. Add a line like this: LIBS += "C:/Path/to/Bloomberg/bloomberg.lib"

reezeus

Well, I've been struggling to find the correct syntax because I was specifying the path of the folder containing the Object File Library instead of the path to the file directly...
I have added this to the .pro file:
LIBS += "Z:/.../C++API/v3.8.18.1/lib/blpapi3_64.lib"
And suddenly it seemed to work.
But Qt creator asked me to setup debugging symbols for windows (I assume it recognized I was using a new debugger for the first time), I say yes and then it crashed with an error message "The CDB process terminated".
The problem is that now it happens every time I start debugging, without even a message in the debugging window, it appears as soon as I press F5.

reezeus

In fact I can't even run the app, the output tab shows this immediately after Ctrl + R:
Starting C:...\QtProjects\GRM_DMGT\build-GRM_DMGT-Desktop_Qt_5_5_0_MSVC2013_64bit-Debug\debug\GRM_DMGT.exe...
The program has unexpectedly finished.
C:...\QtProjects\GRM_DMGT\build-GRM_DMGT-Desktop_Qt_5_5_0_MSVC2013_64bit-Debug\debug\GRM_DMGT.exe crashed

JKSH

@reezeus said:

And suddenly it seemed to work.

Good to hear!

But Qt creator asked me to setup debugging symbols for windows (I assume it recognized I was using a new debugger for the first time), I say yes and then it crashed with an error message "The CDB process terminated".
The problem is that now it happens every time I start debugging, without even a message in the debugging window, it appears as soon as I press F5.

Hmm... I don't have experience with CDB, so I can't help you here, sorry. (I use MinGW + GDB most of the time)

@reezeus said:

In fact I can't even run the app, the output tab shows this immediately after Ctrl + R:
Starting C:...\QtProjects\GRM_DMGT\build-GRM_DMGT-Desktop_Qt_5_5_0_MSVC2013_64bit-Debug\debug\GRM_DMGT.exe...
The program has unexpectedly finished.
C:...\QtProjects\GRM_DMGT\build-GRM_DMGT-Desktop_Qt_5_5_0_MSVC2013_64bit-Debug\debug\GRM_DMGT.exe crashed

The crash could be caused by many things, for example:

A bug in your code, OR
A bug in the Bloomberg library, OR
3, Incompatible libraries/DLLs

What version of MSVC was the Bloomberg library built with? (Note: Different versions of MSVC are not compatible with each other. If the Bloomberg library was built with MSVC 2010, then you must also use the MSVC 2010 version of Qt)

reezeus

Hi JKSH

I haven't checked the forum this week end, just saw your message.
Actually I find it out, although the solution doesn't make full sense for me:
When adding the external library using the Qt tool, I had ticked "Add 'd' suffix for debug version", which I believed was the thing to do since I work in debug mode and not release mode.
Now everything is fine, I have finally (!!) managed to compile The Bloomberg library within Qt creator.
Thanks a LOT for your help and patience, It is really good to have people like you to help people like me on this forum, especially because your also the one who guided me on my previous post, when I asked how to integrate the Bloomberg library... I thought this would be straight forward... :)
Cheers