[solved] Newbie is confused.How to add dynamic data to TableView and parse through it send data to c++

[p3c0]

@vishnu Im asking how do you change the items added in ListModel ? That signal will only be updated only when you update the existing items in the model.
For eg:

ListModel {
    id: myModel

    ListElement {
        name: "abc"
        age: 12
    }

    onDataChanged: console.log("Changed")
}

//updating the list model
myModel.set(0, { "name" : "xyz" } )

So here the signal dataChanged will be triggered and hence the slot onDataChanged in QML will be invoked. Same will work for C++ slot too.

Now in your earlier code you are just adding and removing the rows so those signals (mentioned earlier) will be triggered.

[vishnu]

@p3c0
I am no where doing that kind of updating. I am assuming that ListModel.append method does updating the model as well as view.

Button{
                id:addNewRowButton
                text: "ADD"
                onClicked: {
                    setTableModel.append({"x_position": 0,
                                             "y_position":0,
                                             "z_position":0,
                                             "velocity":0,
                                             "acceleration":0,
                                             "deceleration":0,
                                             "tool":0,
                                             "tracking_x":0,
                                             "tracking_y":0,
                                             "tracking_z":0}
                                         )
                }
            }

[p3c0]

@vishnu No that is not updating. That wont invoke the data changed signal.
As said earlier if you use append or remove use rowsInserted or rowsRemoved signals repectively.

[vishnu]

@p3c0
you are right. This works perfect. I can see the data in c++ when ever a new row is added.

 QObject::connect(model,SIGNAL(rowsInserted(QModelIndex,int,int)),
                         &tcpCommunicationPort,SLOT(onRowsInserted(QModelIndex,int,int)));

But when one of item in the Row is changed I can't see the new data in c++.So that means only Set/setproperty of ListModel will invoke the data changed signal. That mean My qml code is wrong if i want dataChangedsignal.
I changed my TableView like this:

TableView{
            id:setTableView
            objectName: "setTableView"
            model: {
                 setTableModel.set(0,{"x_position": 0,
                                       "y_position":300,
                                       "z_position":500,
                                       "velocity":0,
                                       "acceleration":0,
                                       "deceleration":0,
                                       "tool":0,
                                       "tracking_x":0,
                                       "tracking_y":0,
                                       "tracking_z":0});
                setTableModel.set(1,{"x_position": 0,
                                      "y_position":400,
                                      "z_position":800,
                                      "velocity":0,
                                      "acceleration":0,
                                      "deceleration":0,
                                      "tool":0,
                                      "tracking_x":0,
                                      "tracking_y":0,
                                      "tracking_z":0})
            }

Now the entire view if gone. I cannot add anymore rows.That means what I have done is wrong.But don't know what to do.
Also If the user changes some value in any of the times.how can i know which value is changed? TableView has onClicked signal I can get the current row ,and delegate has access to the properties styleData.row - the index of the row ; styleData.column - the index of the column. Don't know how to make use of them.
Can you please tell me what exactly have to be done on my QML side. Should i change my delegate or View or Model code?Thanks.

[p3c0]

@vishnu Keep your code with append and remove as it is. It just adds and removes the rows. Now to update the already added elements in ListModel use set.
So,

append -> rowsInserted
remove -> rowsRemoved
update i.e set -> dataChanged

[vishnu]

@p3c0
I got the meaning what your saying but Where and how exactly I should do that set.
For eg: should I do like this

Button{
                id:addNewRowButton
                text: "ADD"
                onClicked: {
                    setTableModel.append({"x_position": 0,
                                             "y_position":0,
                                             "z_position":0,
                                             "velocity":0,
                                             "acceleration":0,
                                             "deceleration":0,
                                             "tool":0,
                                             "tracking_x":0,
                                             "tracking_y":0,
                                             "tracking_z":0}
                                         )
//ofcourse index is not defined, May be I make a property and increment it when even I add new row.
                    setTableModel.set(index,{"x_position": 0,
                                          "y_position":0,
                                          "z_position":0,
                                          "velocity":0,
                                          "acceleration":0,
                                          "deceleration":0,
                                          "tool":0,
                                          "tracking_x":0,
                                          "tracking_y":0,
                                          "tracking_z":0})
                }

How about defalut values where should i set them?
Is It in Tableview:this went totally wrong.

id:setTableView
            objectName: "setTableView"
            model: {
                 setTableModel.set(0,{"x_position": 0,
                                       "y_position":300,
                                       "z_position":500,
                                       "velocity":0,
                                       "acceleration":0,
                                       "deceleration":0,
                                       "tool":0,
                                       "tracking_x":0,
                                       "tracking_y":0,
                                       "tracking_z":0});

[p3c0]

@vishnu See

• set is used to update the ListModel
• since you have used TextInput to allow user to update the data you need a way to update the model from this. This can be done in onAccepted handler of TextInput
  So to sum up, for eg:

delegate: TextInput {
    anchors.fill: parent
    text: styleData.value
    onAccepted: {
        myModel.set( styleData.row, { title: text } ) //updates the role name "title" with updated text of TextInput
    }
}

[vishnu]

@p3c0
Thanks for the explanation.Now I am not able to know which role is changed.
As you said I did like this in QML.

TableViewColumn {
                role: "tracking_z"
                title: "Tz mm"
                delegate:
                    TextInput {
                    validator: IntValidator {}
                    text: styleData.value
                    onAccepted: {
                    setTableModel.set(styleData.row,{"tracking_z":parseInt(text)})
                    }
                }

For each column view I have a separate delegate because the IntValidator differs for each role.When ever there is datachanged this SLOT is called successfully.

void TCPCommunicationPort::onDataChanged(const QModelIndex &topLeft, const QModelIndex &bottomRight, const QVector<int> &roles)
{
    qDebug() << "row changed"<<topLeft.row();//getting the row number
    qDebug() << "column changed"<<topLeft.column();//this is always zero.I don't know why.
    QVariant newValue = topLeft.data(roles[0]);
    qDebug() << "Data Changed in cpp"<<newValue.toInt();//Getting the value where ever i change in the tableView.   
//How to get the role name for which corresponding value is changed. 
}

Main problem is how to go the position where I have saved the tabledata to a position in Qbytearray.Can I access this model in onDataChanged SLOT?
QAbstractListModel *model = qvariant_cast<QAbstractListModel *>(qmlmodel); //convert to QAbstractListModel
Atleast I will try to read the whole new data(ofcourse it is insufficient) but my purpose is served.

[p3c0]

@vishnu

• Can I access this model in onDataChanged SLOT?
  -Yes. The QModelIndex also returns the model. Use topLeft.model()

• How to get the role name for which corresponding value is changed.
  -Once you get the model using above method use roleNames().
  topLeft.model()->roleNames()[roles[0]]. This will give exact role name.

• Atleast I will try to read the whole new data(ofcourse it is insufficient) but my purpose is served.
  -Ok. Would't that be unnecessary ?

[vishnu]

@p3c0
perfect.served my purpose :) but inefficient solution :(.

• Atleast I will try to read the whole new data(ofcourse it is insufficient) but my purpose is served.
  -Ok. Would't that be unnecessary ?
  because I have to send the data by array of char and I have saved the data from Tableview to char array like this:

char m_senddataBuffer[3256]={0};//I know the max size
char *positionValue;
    positionValue = &m_senddataBuffer[56];//created a pointer to a particular position.
    int count=0;
    for (int i = 0; i<rows; i++) {
        for(int j = model->roleNames().count()-1; j>=0; j--) { //get the roles count
            QVariant rowData= model->index(i, 0).data(j); //get the actual data using roles
            QString rolename = model->roleNames()[j];
            int value =rowData.toInt();
            //qDebug()<<" row"<<i << "role name"<<rolename<< "value "<<value;
            if(!QString::compare(rolename,"x_position",Qt::CaseInsensitive))
            {
                qDebug()<<"x_position is running"<<++count;
                value=value*1000;
//int to char array
                *(positionValue++) = (value) & 0xFF;
                *(positionValue++) = (value >> 8) & 0xFF;
                *(positionValue++) = (value >> 16) & 0xFF;
                *(positionValue++) = (value >> 24) & 0xFF;
            }
//and so on...

I just copy pasted the same code in onDataChanged SLOT. I thought of writing a function readModel(QAbstractItemModel model). but the typecased model is of type QAbstractListModel.So I have done like this. Any improvements can be done. Please let me know.

[p3c0]

@vishnu

perfect.served my purpose :) but inefficient solution :(.

What inefficient ?

[vishnu]

@p3c0
reading the whole model when there is just one data has to be changed.

[p3c0]

@vishnu Right that is why we have dataChanged :)