PinchArea scale in and scale out touch coordinates

beemaneni

Hi guys,
Do anyone know the answer...Please help me ..i am waiting for the help :-(

Thanks
Bala Beemaneni

dheerendra

Did you look at the previousScale value of Pinch ? When the the pinch starts it starts with value 1.0. By reading the value of scale and previous scale continuously you may figure out the either it is scale-in or scale-out.

beemaneni

Hi,
I really dont understand that will solve the problem.Consider
*1st pinch: scale is 2.0 and previousScale: 0 *when we pinch again
2nd Pinch: scale is 3.0 and previousScale: 2 .so now u can say we scale-in ...bt at the next time we scale-in only a small amount so that
3rd pinch: scale is 1.5 and previousScale: 3
consider pinch as scale-out now
4th pinch: scale is 2 and previous scale: 1.5
5thpinch: scale is 3 and previousScale: 2

By this way how can we figure out?
I am very much confused.If possible can u figure out anything with this?

Thanks in Advance

With Regards
Bala

p3c0

Did you see "this":http://developer.nokia.com/community/wiki/How_to_handle_pinch_gestures_using_PinchArea_item example ? May be onPinchStarted and onPinchUpdated handlers would be of interest to you.

beemaneni

hi p3c0
Thanks for ur interest and i have seen that.that works well for pinch and zoom of an image ,bt further ater pinch and scale i need to set zoom value for camera.what value do i set for that and hw do i find that?

Thanks
Bala beemaneni

p3c0

Is that needed ? Can't you directly use the pinch.scale to set the zoom ?

beemaneni

Every time pinch starts it resets to 1.So i used like
pinch.scale += pinch.previousScale

Even this does not give proper values as previousScale and scale are always equal.

p3c0

Created the following sample, it zooms the camera as expected. Can you try it ?
@
Item {
width: Screen.width
height: Screen.height

Camera {
    id: camera
    imageProcessing.whiteBalanceMode: CameraImageProcessing.WhiteBalanceFlash

    exposure {
        exposureCompensation: -1.0
        exposureMode: Camera.ExposurePortrait
    }

    flash.mode: Camera.FlashRedEyeReduction
}

VideoOutput {
    source: camera
    anchors.fill: parent
    focus : visible // to receive focus and capture key events when visible
}

PinchArea {
    anchors.fill: parent
    pinch.minimumScale: 0.1
    pinch.maximumScale: 1
    onPinchUpdated: camera.setDigitalZoom(pinch.scale)
}

}
@

beemaneni

Did u capture the image and check?
There is a marginal difference between the image captured and the amount of image zoomed for capture..

p3c0

No i didn't as the question didn't say so. I thought you were struggling with the zooming using PinchArea and hence the above example. May be you should alter your question now ? Can you post what you have tried ?

beemaneni

Here the requirement goes as
I should start the camera and zoom in zoom out the source and capture the image.
my code is
@Camera {
id: cameraObj
captureMode: Camera.CaptureStillImage

    onDigitalZoomChanged: {
        pathText.text = cameraObj.digitalZoom.toString()
    }
    imageCapture {
        resolution: "960x1280"
       onImageCaptured: {
          // some stuff here
        }
        onImageSaved: {           
         // similar 
        }
 }
VideoOutput {
    id: viewfinderBack
    source: cameraObj
    anchors.fill: parent
    autoOrientation: true
    focus: visible
}

PinchArea {
id: pincharea
anchors.fill: parent
pinch.target: viewfinderBack
pinch.minimumScale: 1.0
pinch.maximumScale: 4.0 // max cam zoom

    onPinchStarted: {
    }
    onPinchUpdated: {
      // Here th code should find out whether user is scaled in or scaled out.
       cameraObj.setDigitalZoom(pinch.scale)
    }

}
@

Hi check out this and let me know ..

p3c0

Yes there's a difference in the captured image and that the VideoOutput shows. I also tried "this":http://qt-project.org/doc/qt-5/qtmultimedia-declarative-camera-example.html QML camera example it too does that same. Can you check it if it works for you ?

beemaneni

Hi thanks for ur interest..

I have seen that example already and they dont use pincharea for scale in and scale out.Instead they use mousearea .So that was not helpful as i tried implementing same logic to pincharea..

Thanks
Bala Beemaneni

p3c0

I wanted to say that in that example also even if you digital zoom to the max and take the picture the result is not the same as expected. May be this is a bug, not sure though.

beemaneni

oh that is weird...i have nt checked that..let me check and update you

Thanks
Bala Beemaneni

beemaneni

Hi
it captures the accurate image only..the example is quite good enough.
As pinch and zoom is common in all mobiles now ,the logic should be pretty simple.Hope i am missing some basic stuff.
i am struggling with this for so long almost an month..Can i get any help other than qt forum ? can u suggest any?

Thanks Bala Beemaneni

p3c0

Since the example is working properly, can you check the following scenario ?

from declarative-camera example, zoom to highest level and capture the pic.
from your app, zoom to the highest level and capture the pic.

Compare these two pics if they are identical. Since both of them have set the digital zoom level to the highest which i assume is 4x, both captured pics must be identical.

beemaneni

Hi
I would like to tel u onething here...if i set the zoom level manually to 1 or 2 or ...4 it works same as the example model.Both pics are identical.But the problem here is we are not able to sink the scale in value to zoom value.the camera viewfinder value i.e: the visible portion of the screen and captured portion of an image are not equal.Hope u know this already..
Here wen i scale in ,based on scale portion zoom value has to be set.

Thanks

p3c0

bq. But the problem here is we are not able to sink the scale in value to zoom value

One way to check this would be to check what are the actual values that are passed to setDigitalZoom function in the declarative-camera example when one zoom's it using the slider. These values can then be checked with the values that you set to setDigitalZoom which you receive when you Pinch. May be there's a difference, a multiplication factor or something like that.

beemaneni

hi
i was trying the above method..it seems to be quite painful..But certainly there seems to be a multiplication factor .Meanwhile if u get any ideas please let me know

Thanks