Building Qt 5.2.1 in latest Visual Studios
-
Actually, the build was finishing just as I wrote that...
-
So... ~50 minutes, give or take. JOM helped a little? More cores, maybe a non factor. Not sure if I set the CL to /MP, now that I think about it. I'm sure it could be helped.
-
Okay, now what? I've got some includes to include, and some cmakes in CD to make?
Actually I see a bunch of promising output in qtbase/lib to go with the includes.
-
... So really we "just" need the includes and the output from the prefix PWD/qtbase? The harder part is establishing a strategy for maintenance, end-user consumption, etc.
-
Okay, I reconfigured, no prefix, "qtbase/lib" dropped "in place" alongside "qtbase/include". I set the CL environment variable and ran JOM; and the build that took nearly 1 hour before, took maybe 2 minutes (conservatively)! That's on an 8-core machine. I can hardly believe that. It sure does look like the DLLs and all are there. WOW,
-
If I could mark it as an answer I would. Thanks again for setting me straight.
-
Well, you don't need to build Qt for your end-users. For them, you just deploy the libraries you need ("link":http://qt-project.org/doc/qt-5/windows-deployment.html, there are guides like that for every platform). But of course, you know your situation better than I do.
[quote]Okay, now what? I’ve got some includes to include, and some cmakes in CD to make?[/quote]
That depends on what you want to achieve. If you want to use Qt Creator for development, then you just need to point it to your newly built qmake.exe, and it will configure itself automatically; no need to link or include anything by hand.
If you want to use Visual Studio - there is a plugin for that available on the downloads page.
If you want to run everything from command line, you need to add qtbase/bin to PATH.
[quote]So really we “just” need the includes and the output from the prefix PWD/qtbase?[/quote]
qtbase/bin, qtbase/includes, qtbase/mkspecs. You can automatically separate those if you perform an out of source build, like this:
@
// assuming Qt source code is in qt-src
mkdir qt-build
cd qt-build
..\qt-src\configure <your Qt flags> -prefix CD\qtbase
nmake
nmake install
@This will compile and install Qt to qt-build, leaving your Qt source code intact.
-
Right I understand re: developers and deployed binaries. The configure make system is a little foreign to me is all, and when I have used it a bit opaque if cumbersome. I'm sure not once you get used to it.
Anyhow, I expect there's some way to identify libs (and dlls or .sos) for linkage on the other side of their includes. Much of which is IDE specific.
The much harder part about our situation is mitigating cross platform risk factors, less technical and more geo-political in nature, coordinating the builds.
Thanks...
-
Yeah, cross-platform build servers are always problematic. Qt makes the compilation part quite easy (the same code works on all platforms without any changes), but there always are lots of other problems to solve ;)
OK, I hope I've helped you at least a bit. If there are more questions, please ask. Have fun! :)
-
I can build QT using VC++ 2013 without OpenSSL, but with OpenSSL I get the errors below.
Suggestions?
Robin
cl -c -FIqt_pch.h -Yuqt_pch.h -Fp.pch\debug\Qt5Networkd_pch.pch -nologo-Zm200 -Zc:wchar_t -Zi -MDd -GR -W3 -w34100 -w34189 /Fd....\lib\Qt5Networkd.pdb
-DUNICODE -DWIN32 -DQT_NO_USING_NAMESPACE -DQT_BUILD_NETWORK_LIB -DQT_BUILDING_
QT -DQT_NO_CAST_TO_ASCII -DQT_ASCII_CAST_WARNINGS -DQT_MOC_COMPAT -DQT_USE_QSTRI
NGBUILDER -DQT_DEPRECATED_WARNINGS -DQT_DISABLE_DEPRECATED_BEFORE=0x040800 -D_US
E_MATH_DEFINES -DQT_NO_EXCEPTIONS -DQT_CORE_LIB -I"C:\qt\openssl-1.0.1f\openssl-
1.0.1f\include" -I"....\include" -I"....\include\QtNetwork" -I"....\include\Q
tNetwork\5.2.1" -I"....\include\QtNetwork\5.2.1\QtNetwork" -I"tmp" -I"..\3rdpar
ty\zlib" -I"kernel" -I"....\include\QtCore\5.2.1" -I"....\include\QtCore\5.2.1
\QtCore" -I"....\include\QtCore" -I".moc\debug" -I"....\mkspecs\win32-msvc2010
" -Fo.obj\debug\ @C:\Users\rower\AppData\Local\Temp\nm68AA.tmp
qhttpnetworkreply.cpp
C:\qt\openssl-1.0.1f\openssl-1.0.1f\include\openssl/ssl.h(1) : error C2059: synt
ax error : '.'
c:\qt\qt-everywhere-opensource-src-5.2.1\qt-everywhere-opensource-src-5.2.1\qtba
se\include\qtnetwork\5.2.1\qtnetwork\private../../../../../src/network/ssl/qssl
context_p.h(69) : error C2143: syntax error : missing ';' before ''
c:\qt\qt-everywhere-opensource-src-5.2.1\qt-everywhere-opensource-src-5.2.1\qtba
se\include\qtnetwork\5.2.1\qtnetwork\private../../../../../src/network/ssl/qssl
context_p.h(69) : error C4430: missing type specifier - int assumed. Note: C++ d
oes not support default-int
c:\qt\qt-everywhere-opensource-src-5.2.1\qt-everywhere-opensource-src-5.2.1\qtba
se\include\qtnetwork\5.2.1\qtnetwork\private../../../../../src/network/ssl/qssl
context_p.h(69) : warning C4183: 'createSsl': missing return type; assumed to be
a member function returning 'int'
c:\qt\qt-everywhere-opensource-src-5.2.1\qt-everywhere-opensource-src-5.2.1\qtba
se\include\qtnetwork\5.2.1\qtnetwork\private../../../../../src/network/ssl/qssl
context_p.h(70) : error C2061: syntax error : identifier 'SSL'
c:\qt\qt-everywhere-opensource-src-5.2.1\qt-everywhere-opensource-src-5.2.1\qtba
se\include\qtnetwork\5.2.1\qtnetwork\private../../../../../src/network/ssl/qssl
context_p.h(79) : error C2143: syntax error : missing ';' before ''
c:\qt\qt-everywhere-opensource-src-5.2.1\qt-everywhere-opensource-src-5.2.1\qtba
se\include\qtnetwork\5.2.1\qtnetwork\private../../../../../src/network/ssl/qssl
context_p.h(79) : error C4430: missing type specifier - int assumed. Note: C++ d
oes not support default-int
c:\qt\qt-everywhere-opensource-src-5.2.1\qt-everywhere-opensource-src-5.2.1\qtba
se\include\qtnetwork\5.2.1\qtnetwork\private../../../../../src/network/ssl/qssl
context_p.h(80) : error C2143: syntax error : missing ';' before ''
c:\qt\qt-everywhere-opensource-src-5.2.1\qt-everywhere-opensource-src-5.2.1\qtba
se\include\qtnetwork\5.2.1\qtnetwork\private../../../../../src/network/ssl/qssl
context_p.h(80) : error C4430: missing type specifier - int assumed. Note: C++ d
oes not support default-int
c:\qt\qt-everywhere-opensource-src-5.2.1\qt-everywhere-opensource-src-5.2.1\qtba
se\include\qtnetwork\5.2.1\qtnetwork\private../../../../../src/network/ssl/qssl
context_p.h(81) : error C2143: syntax error : missing ';' before ''
c:\qt\qt-everywhere-opensource-src-5.2.1\qt-everywhere-opensource-src-5.2.1\qtba
se\include\qtnetwork\5.2.1\qtnetwork\private../../../../../src/network/ssl/qssl
context_p.h(81) : error C4430: missing type specifier - int assumed. Note: C++ d
oes not support default-int -
Research C4430? Possibly a language standard thing? I don't know the configure option(s), but could C++11 (or other) be specified?
-
I configured openssl like this:
perl Configure VC-WIN32 --prefix=c:\Qt\openssl-1.0.1f\openssl-1.0.1f\release
Qt5 like this:
configure -opensource -opengl desktop -nomake tests -openssl -I C:\qt\openssl-1.0.1f\openssl-1.0.1f\include
Also tried with C++11:
configure.exe -platform win32-msvc2012 -c++11 -opensource -openssl -I C:\qt\openssl-1.0.1f\openssl-1.0.1f\include
The error message points to this line of code:
SSL* createSsl();I can't see anything wrong with that. Error message below.
Ideas?
Robin
qhttpthreaddelegate.cpp
C:\qt\openssl-1.0.1f\openssl-1.0.1f\include\openssl/ssl.h(1) : error C2059: synt
ax error : '.'
c:\qt\qt-everywhere-opensource-src-5.2.1\qt-everywhere-opensource-src-5.2.1\qtba
se\include\qtnetwork\5.2.1\qtnetwork\private../../../../../src/network/ssl/qssl
context_p.h(69) : error C2143: syntax error : missing ';' before '*'
c:\qt\qt-everywhere-opensource-src-5.2.1\qt-everywhere-opensource-src-5.2.1\qtba
se\include\qtnetwork\5.2.1\qtnetwork\private../../../../../src/network/ssl/qssl
context_p.h(69) : error C4430: missing type specifier - int assumed. Note: C++ d
oes not support default-int
c:\qt\qt-everywhere-opensource-src-5.2.1\qt-everywhere-opensource-src-5.2.1\qtba
se\include\qtnetwork\5.2.1\qtnetwork\private../../../../../src/network/ssl/qssl
context_p.h(69) : warning C4183: 'createSsl': missing return type; assumed to be
a member function returning 'int'
c:\qt\qt-everywhere-opensource-src-5.2.1\qt-everywhere-opensource-src-5.2.1\qtba
se\include\qtnetwork\5.2.1\qtnetwork\private../../../../../src/network/ssl/qssl
context_p.h(70) : error C2061: syntax error : identifier 'SSL' -
This was a forum about building Qt. Not openssl. Can I suggest start fresh so as not to confuse readers?
