Help installing Qt Location

[JKSH]

Do you have GPS plugged in, and drivers installed? Note: That example only shows 4 cities: Brisbane, Oslo, Helsinki, and New York

[sandybisaria]

No, but I have found an alternative solution that does not need Qt Location. But thanks for the advice anyway.

[jraichouni]

Hi!

Just installed "Qt 5.2.0 beta 1":http://download.qt-project.org/development_releases/qt/5.2/5.2.0-beta1/qt-mac-opensource-5.2.0-beta1-clang-offline.dmg but it is not possible to perform

@import QtLocation 5.0@

in a qml file.
What preparation is needed to be able to use QtLocation in Qt 5.2?
Is it going to be accessible without any build from source steps, therefore integrated in the complete framework downloads for a desired target system!?

I needed to manually consider the submodules (e.g. qt3d and qtlocation) before build from source process for Qt 5.0.1 to use QtLocation. This was really time-consuming and is currently not possible (see below).

Best regards
jraichouni

P.S.
The build of 5.2.0 on OSX 10.9 (Mavericks) does currently not work as OSX 10.9 is currently unsupported (mkspec) and crashes after hacking this hard coded limitation for the OSX version for instance.

But is a build from source needed to use QtLocation in Qt5.2.0?

[JKSH]

Hi jraichouni,

Qt Location and Qt 3D have not been released yet, and will not be part of Qt 5.2 either. If you want those, you'll need to build them yourself.

Only Qt Positioning will be released in Qt 5.2.

For Mavericks, try the Release Candidate candidate (not a typo): http://download.qt-project.org/snapshots/qt/5.2/5.2.0-rc1/2013-11-26_172/

[jraichouni]

Hi JKSH!

Thanks for your quick reply!

I am going to try the build of the release candidate.

Do you know, why QtLocation is not going to be part of Qt 5.2?

Is there any documentation for the needed steps to build non-standard submodules into the framework?
I have in mind, that there was something like

1. git clone the submodule(s)
2. Edit the file .gitmodules
3. Step into the sumodule(s) directories to explicetly perform make all for each of the modules etc.

It would help to find any explanation of the exact process needed to completely integrate additional available submodules being not considered in the default build configuration.

Best regards from Germany
jraichouni

[JKSH]

You're welcome. :)

Qt Location is not going to be part of Qt 5.2 because the module is not ready yet. It still needs to be polished to reach a good quality before it is released. The same goes to other modules like Qt 3D, Qt Versit, Qt JSON DB, etc.

These modules were polished and released as part Qt 5.2: Qt NFC, Qt Bluetooth, Qt Positioning, Qt Windows Extras, Qt Mac Extras, Qt Android Extras.

Which part of Qt Location do you want? Is "Qt Positioning":http://doc-snapshot.qt-project.org/qt5-stable/qtpositioning-index.html enough? If so, you don't need to build anything -- just install Qt 5.2

[AlterX]

[quote author="JKSH" date="1385602544"]
Which part of Qt Location do you want? Is "Qt Positioning":http://doc-snapshot.qt-project.org/qt5-stable/qtpositioning-index.html enough? If so, you don't need to build anything -- just install Qt 5.2[/quote]

Are you sure?
I am using Qt 5.2 stable snapshot 9th December and even positioning module is valid, it doesn't create a valid QGeoPositionSource...

[JKSH]

Hi AlterX,

What platform are you running? Qt Positioning isn't supported on Android yet: http://www.kdab.com/qt-on-android-episode-1/

If it's another platform, do you have the GPS hardware connected and appropriate drivers installed?

[AlterX]

I know it's not yet supported on Android...I had to rebuilt positioning by myself.

[jraichouni]

Hi!

Currently I have Qt5.2.0 installed on OSX.

My try to build QtLocation fails :-(

My proceeding:

1. Install binaries and sources of Qt5.2.0
2. cd into $QTDIR/../Src
3. git clone git://gitorious.org/qt/qtlocation.git
4. cd qtlocation
5. qmake -r
6. make -j 4 all

make ends up with the following error:
@In file included from positionpollfactory.cpp:42:
./positionpollfactory.h:46:10: fatal error: 'QGeoPositionInfoSourceFactory' file not found
#include <QGeoPositionInfoSourceFactory>
^@

It would be great to get an explanation on how to build QtLocation!

Cheers
jraichouni

[AlterX]

Pleae refer to my thread on bug track:
"qt location":https://bugreports.qt-project.org/browse/QTBUG-35278

[jraichouni]

Hi!

I tried that without success:

1. Open /Users/jamil/Qt5.2.0/5.2.0/Src/qtlocation/qtlocation.pro in Qt Creator
2. Run Build -> Run qmake (exits normally)
3. Run Build -> Build project "qtlocation"

No. 3) Outputs:

@15:11:06: Starting: "/usr/bin/make"

(...)

/Users/jamil/Qt5.2.0/5.2.0/Src/qtlocation/src/positioning/qgeopositioninfosource.cpp:470:10: fatal error: 'moc_qgeopositioninfosource.cpp' file not found
#include "moc_qgeopositioninfosource.cpp"
^
1 error generated.
make[3]: *** [.obj/release/qgeopositioninfosource.o] Error 1
make[2]: *** [release-all] Error 2
make[1]: *** [sub-positioning-make_first-ordered] Error 2
make: *** [sub-src-make_first] Error 2
15:11:12: The process "/usr/bin/make" exited with code 2.
Error while building/deploying project qtlocation (kit: Desktop Qt 5.2.0 clang 64bit)
When executing step 'Make'@

It would be great to get a small step by step explanation like:

1. Download and install Qt5.2.0 including the sources
2. Change into directory ~/Qt5.2.0/5.2.0/Src/qtlocation
3. Run qmake -r -spec macx-clang CONFIG+=x86_64
4. Run make

This results into:
@
/Applications/Xcode.app/Contents/Developer/usr/bin/make -f Makefile.Release all
/Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/clang++ -c -pipe -O2 -isysroot /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.9.sdk -mmacosx-version-min=10.9 -fvisibility=hidden -fvisibility-inlines-hidden -fno-exceptions -Wall -W -fPIC -DQT_NO_LIBUDEV -DQT_NO_EVDEV -DQT_NO_XCB -DQT_NO_XKBCOMMON -DTOUCH_EVENT_WORKAROUND -DQT_NO_EXCEPTIONS -D_LARGEFILE64_SOURCE -D_LARGEFILE_SOURCE -DQT_NO_DEBUG -DQT_PLUGIN -DQT_QUICK_LIB -DQT_QML_LIB -DQT_POSITIONING_LIB -DQT_NETWORK_LIB -DQT_GUI_LIB -DQT_CORE_LIB -I/Users/jamil/Qt5.2.0/5.2.0/clang_64/mkspecs/macx-clang -I. -I. -I/Users/jamil/Qt5.2.0/5.2.0/clang_64/lib/QtQuick.framework/Versions/5/Headers -I/Users/jamil/Qt5.2.0/5.2.0/clang_64/lib/QtQuick.framework/Versions/5/Headers/5.2.0 -I/Users/jamil/Qt5.2.0/5.2.0/clang_64/lib/QtQuick.framework/Versions/5/Headers/5.2.0/QtQuick -I/Users/jamil/Qt5.2.0/5.2.0/clang_64/lib/QtQml.framework/Versions/5/Headers -I/Users/jamil/Qt5.2.0/5.2.0/clang_64/lib/QtQml.framework/Versions/5/Headers/5.2.0 -I/Users/jamil/Qt5.2.0/5.2.0/clang_64/lib/QtQml.framework/Versions/5/Headers/5.2.0/QtQml -I../../../lib/QtPositioning.framework/Versions/5/Headers -I../../../lib/QtPositioning.framework/Versions/5/Headers/5.3.0 -I../../../lib/QtPositioning.framework/Versions/5/Headers/5.3.0/QtPositioning -I/Users/jamil/Qt5.2.0/5.2.0/clang_64/lib/QtCore.framework/Versions/5/Headers -I/Users/jamil/Qt5.2.0/5.2.0/clang_64/lib/QtCore.framework/Versions/5/Headers/5.2.0 -I/Users/jamil/Qt5.2.0/5.2.0/clang_64/lib/QtCore.framework/Versions/5/Headers/5.2.0/QtCore -I/Users/jamil/Qt5.2.0/5.2.0/clang_64/lib/QtNetwork.framework/Versions/5/Headers -I/Users/jamil/Qt5.2.0/5.2.0/clang_64/lib/QtGui.framework/Versions/5/Headers -I.moc/release -I/Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.9.sdk/System/Library/Frameworks/OpenGL.framework/Versions/A/Headers -I/Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.9.sdk/System/Library/Frameworks/AGL.framework/Headers -F/Users/jamil/Qt5.2.0/5.2.0/clang_64/lib -F/Users/jamil/Qt5.2.0/5.2.0/Src/qtlocation/lib -o .obj/release/locationsingleton.o locationsingleton.cpp
locationsingleton.cpp:158:12: error: no matching conversion for functional-style cast from 'QList<QGeoCoordinate>' to 'QGeoRectangle'
return QGeoRectangle(internalCoordinates);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/Users/jamil/Qt5.2.0/5.2.0/clang_64/lib/QtPositioning.framework/Headers/qgeorectangle.h:58:5: note: candidate constructor not viable: no known conversion from 'QList<QGeoCoordinate>' to 'const QGeoRectangle' for 1st argument
QGeoRectangle(const QGeoRectangle &other);
^
/Users/jamil/Qt5.2.0/5.2.0/clang_64/lib/QtPositioning.framework/Headers/qgeorectangle.h:59:5: note: candidate constructor not viable: no known conversion from 'QList<QGeoCoordinate>' to 'const QGeoShape' for 1st argument
QGeoRectangle(const QGeoShape &other);
^
/Users/jamil/Qt5.2.0/5.2.0/clang_64/lib/QtPositioning.framework/Headers/qgeorectangle.h:55:5: note: candidate constructor not viable: requires 0 arguments, but 1 was provided
QGeoRectangle();
^
/Users/jamil/Qt5.2.0/5.2.0/clang_64/lib/QtPositioning.framework/Headers/qgeorectangle.h:56:5: note: candidate constructor not viable: requires 3 arguments, but 1 was provided
QGeoRectangle(const QGeoCoordinate &center, double degreesWidth, double degreesHeight);
^
/Users/jamil/Qt5.2.0/5.2.0/clang_64/lib/QtPositioning.framework/Headers/qgeorectangle.h:57:5: note: candidate constructor not viable: requires 2 arguments, but 1 was provided
QGeoRectangle(const QGeoCoordinate &topLeft, const QGeoCoordinate &bottomRight);
^
1 error generated.
make[4]: *** [.obj/release/locationsingleton.o] Error 1
make[3]: *** [release-all] Error 2
make[2]: *** [sub-positioning-make_first] Error 2
make[1]: *** [sub-imports-make_first-ordered] Error 2
make: *** [sub-src-make_first] Error 2
@

Reger to my next post on the next page! (had to Split it because of ist length)

[jraichouni]

I tried is:

1. cd into ~/Qt5.2.0/5.2.0/Src
2. mv qtlocation qtlocation.bak
3. git clone git://gitorious.org/qt/qtlocation.git
4. cd qtlocation
5. qmake -r -spec macs-clang CONFIG+=x86_64
6. make

It fails:
@
/Applications/Xcode.app/Contents/Developer/usr/bin/make -f Makefile.Release all
/Users/jamil/Qt5.2.0/5.2.0/clang_64/bin/moc -DQT_NO_LIBUDEV -DQT_NO_EVDEV -DQT_NO_XCB -DQT_NO_XKBCOMMON -DQT_NO_EXCEPTIONS -D_LARGEFILE64_SOURCE -D_LARGEFILE_SOURCE -DQT_NO_DEBUG -DQT_PLUGIN -DQT_POSITIONING_LIB -DQT_GUI_LIB -DQT_CORE_LIB -D__APPLE__ -D__GNUC__=4 -I/Users/jamil/Qt5.2.0/5.2.0/clang_64/mkspecs/macx-clang -I. -I/Users/jamil/Qt5.2.0/5.2.0/clang_64/lib/QtGui.framework/Versions/5/Headers -I/Users/jamil/Qt5.2.0/5.2.0/clang_64/lib/QtCore.framework/Versions/5/Headers -I.moc/release -I/Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.9.sdk/System/Library/Frameworks/OpenGL.framework/Versions/A/Headers -I/Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.9.sdk/System/Library/Frameworks/AGL.framework/Headers -F/Users/jamil/Qt5.2.0/5.2.0/Src/qtlocation/lib -F/Users/jamil/Qt5.2.0/5.2.0/clang_64/lib qgeoareamonitor_polling.h -o .moc/release/moc_qgeoareamonitor_polling.cpp
/Users/jamil/Qt5.2.0/5.2.0/clang_64/bin/moc -DQT_NO_LIBUDEV -DQT_NO_EVDEV -DQT_NO_XCB -DQT_NO_XKBCOMMON -DQT_NO_EXCEPTIONS -D_LARGEFILE64_SOURCE -D_LARGEFILE_SOURCE -DQT_NO_DEBUG -DQT_PLUGIN -DQT_POSITIONING_LIB -DQT_GUI_LIB -DQT_CORE_LIB -D__APPLE__ -D__GNUC__=4 -I/Users/jamil/Qt5.2.0/5.2.0/clang_64/mkspecs/macx-clang -I. -I/Users/jamil/Qt5.2.0/5.2.0/clang_64/lib/QtGui.framework/Versions/5/Headers -I/Users/jamil/Qt5.2.0/5.2.0/clang_64/lib/QtCore.framework/Versions/5/Headers -I.moc/release -I/Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.9.sdk/System/Library/Frameworks/OpenGL.framework/Versions/A/Headers -I/Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.9.sdk/System/Library/Frameworks/AGL.framework/Headers -F/Users/jamil/Qt5.2.0/5.2.0/Src/qtlocation/lib -F/Users/jamil/Qt5.2.0/5.2.0/clang_64/lib qgeoareamonitor_polling.cpp -o .moc/release/qgeoareamonitor_polling.moc
/Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/clang++ -c -pipe -O2 -isysroot /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.9.sdk -mmacosx-version-min=10.9 -fvisibility=hidden -fvisibility-inlines-hidden -fno-exceptions -Wall -W -fPIC -DQT_NO_LIBUDEV -DQT_NO_EVDEV -DQT_NO_XCB -DQT_NO_XKBCOMMON -DQT_NO_EXCEPTIONS -D_LARGEFILE64_SOURCE -D_LARGEFILE_SOURCE -DQT_NO_DEBUG -DQT_PLUGIN -DQT_POSITIONING_LIB -DQT_GUI_LIB -DQT_CORE_LIB -I/Users/jamil/Qt5.2.0/5.2.0/clang_64/mkspecs/macx-clang -I. -I/Users/jamil/Qt5.2.0/5.2.0/clang_64/lib/QtGui.framework/Versions/5/Headers -I/Users/jamil/Qt5.2.0/5.2.0/clang_64/lib/QtCore.framework/Versions/5/Headers -I.moc/release -I/Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.9.sdk/System/Library/Frameworks/OpenGL.framework/Versions/A/Headers -I/Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.9.sdk/System/Library/Frameworks/AGL.framework/Headers -F/Users/jamil/Qt5.2.0/5.2.0/Src/qtlocation/lib -F/Users/jamil/Qt5.2.0/5.2.0/clang_64/lib -o .obj/release/qgeoareamonitor_polling.o qgeoareamonitor_polling.cpp
In file included from qgeoareamonitor_polling.cpp:42:
./qgeoareamonitor_polling.h:45:10: fatal error: 'qgeoareamonitorsource.h' file not found
#include <qgeoareamonitorsource.h>
^
1 error generated.
make[5]: *** [.obj/release/qgeoareamonitor_polling.o] Error 1
make[4]: *** [release-all] Error 2
make[3]: *** [sub-positionpoll-make_first] Error 2
make[2]: *** [sub-position-make_first] Error 2
make[1]: *** [sub-plugins-make_first-ordered] Error 2
make: *** [sub-src-make_first] Error 2
@

Every try ends up in a different error and I do not have any idea what I should do
to get qtlocation being built!?

Cheers
jraichouni