Qt 5.7 and cross compile

deleted71

So what command are you running?

Niko Hallikainen

@I.C.Wiener
In path was error, but now I get this error:
checking for C++11...
/home/nikohal/raspi/arm-bcm2708/gcc-linaro-arm-linux-gnueabihf-raspbian/bin/arm-linux-gnueabihf-g++ -c -march=armv8-a+crc -mtune=cortex-a53 -mfpu=crypto-neon-fp-armv8 -pipe -Os -mthumb -std=c++1z -mfloat-abi=hard --sysroot=/home/nikohal/raspi/sysroot -O2 -std=gnu++11 -Wall -W -fPIC -I. -I../../../mkspecs/devices/linux-rpi3-g++ -o c++11.o c++11.cpp
/home/nikohal/raspi/arm-bcm2708/gcc-linaro-arm-linux-gnueabihf-raspbian/bin/arm-linux-gnueabihf-g++: error while loading shared libraries: libstdc++.so.6: cannot open shared object file: No such file or directory
make: *** [c++11.o] Error 127
C++11 disabled.
ERROR: Qt requires a C++11 compiler and yours does not seem to be that.
Please upgrade.
In path was "tools" what I have wasn't

Niko Hallikainen

@I.C.Wiener Command is configure. I also install packages libc6-i386 lib32z1 lib32stdc++6. And now It give this error:
/home/nikohal/raspi/arm-bcm2708/gcc-linaro-arm-linux-gnueabihf-raspbian/bin/arm-linux-gnueabihf-g++ -c -march=armv8-a+crc -mtune=cortex-a53 -mfpu=crypto-neon-fp-armv8 -pipe -Os -mthumb -std=c++1z -mfloat-abi=hard --sysroot=/home/nikohal/raspi/sysroot -O2 -std=gnu++11 -Wall -W -fPIC -I. -I../../../mkspecs/devices/linux-rpi3-g++ -o c++11.o c++11.cpp
arm-linux-gnueabihf-g++: virhe: unrecognized argument in option ”-march=armv8-a+crc”
arm-linux-gnueabihf-g++: huom: valid arguments to ”-march=” are: armv2 armv2a armv3 armv3m armv4 armv4t armv5 armv5e armv5t armv5te armv6 armv6-m armv6j armv6k armv6s-m armv6t2 armv6z armv6zk armv7 armv7-a armv7-m armv7-r armv7e-m armv8-a iwmmxt iwmmxt2 native
arm-linux-gnueabihf-g++: virhe: unrecognized command line option ”-std=c++1z”
make: *** [c++11.o] Error 1
C++11 disabled.
ERROR: Qt requires a C++11 compiler and yours does not seem to be that.
Please upgrade.

deleted71

What command did you execute? The whole command line please.
And please try to use

// Code markers

for console output and commands.

Niko Hallikainen

@I.C.Wiener Command is:

 ./configure -release -opengl es2 -device linux-rpi3-g++ -device-option CROSS_COMPILE=~/raspi/arm-bcm2708/gcc-linaro-arm-linux-gnueabihf-raspbian/bin/arm-linux-gnueabihf- -sysroot ~/raspi/sysroot -opensource -confirm-license -make libs -prefix /usr/local/qt5pi -extprefix ~/raspi/qt5pi -hostprefix ~/raspi/qt5 -v
And I run it in folder qtbase.

deleted71

I had some success by installing

g++-arm-linux-gnueabihf

and then replacing

CROSS_COMPILE=~/raspi/arm-bcm2708/gcc-linaro-arm-linux-gnueabihf-raspbian/bin/arm-linux-gnueabihf-

by

CROSS_COMPILE=/usr/bin/arm-linux-gnueabihf-

In general I was trying to cross-compile Qt5.7 for Raspi 3 for some days, made some progress but in the end, the result was not convincing. I guess the raspi-tools need some updating for raspi 3 and Qt5.7 respectively.

Niko Hallikainen

@I.C.Wiener Yes I install that from ubuntu repository, but it give that error.

/usr/bin/arm-linux-gnueabihf-g++ -c -march=armv8-a+crc -mtune=cortex-a53 -mfpu=crypto-neon-fp-armv8 -pipe -Os -mthumb -std=c++1z -mfloat-abi=hard --sysroot=/home/nikohal/raspi/sysroot -g -Wall -W -fPIC  -I. -I../../mkspecs/devices/linux-rpi3-g++ -o arch.o arch.cpp
arm-linux-gnueabihf-g++: error: unrecognized command line option ‘-std=c++1z’
make: *** [arch.o] Error 1
Unable to determine architecture!

Could not determine the target architecture!
Turn on verbose messaging (-v) to see the final report.
Determining architecture... ()
g++ -c -pipe -g -Wall -W -fPIC  -I. -I../../mkspecs/linux-g++ -o arch.o arch.cpp
g++  -o arch arch.o    
    Found architecture in binary
CFG_HOST_ARCH="x86_64"
CFG_HOST_CPUFEATURES=" mmx sse sse2"
System architecture: 'unknown'
Host architecture: 'x86_64'
Precompiled-headers support enabled.
/usr/bin/arm-linux-gnueabihf-g++ -c -fvisibility=hidden fvisibility.c
Symbol visibility control enabled.
/usr/bin/arm-linux-gnueabihf-g++ --sysroot=/home/nikohal/raspi/sysroot -o libtest.so -shared -Wl,-Bsymbolic-functions -fPIC bsymbolic_functions.c
bsymbolic_functions.c:2:2: error: #error "Symbolic function binding on this architecture may be broken, disabling it (see QTBUG-36129)."
 #error "Symbolic function binding on this architecture may be broken, disabling it (see QTBUG-36129)."
  ^
Symbolic function binding disabled.
checking for C++11... 
/usr/bin/arm-linux-gnueabihf-g++ -c -march=armv8-a+crc -mtune=cortex-a53 -mfpu=crypto-neon-fp-armv8 -pipe -Os -mthumb -std=c++1z -mfloat-abi=hard --sysroot=/home/nikohal/raspi/sysroot -O2 -std=gnu++11 -Wall -W -fPIC  -I. -I../../../mkspecs/devices/linux-rpi3-g++ -o c++11.o c++11.cpp
arm-linux-gnueabihf-g++: error: unrecognized command line option ‘-std=c++1z’
make: *** [c++11.o] Error 1
C++11 disabled.
ERROR: Qt requires a C++11 compiler and yours does not seem to be that.
Please upgrade.

I Google that, but nothing similar not found

deleted71

Hmm, sorry. I do not have my cross-compiling environment set up anymore (it was too fiddly so I now compile on the Raspi3 directly) but I remember me playing around with the qtbase/mkspecs/common/g++-base.conf file. Like changing the -std=c++1z line to -std=c++11, so cheating a little bit. I guess if arm-linux-gnueabihf-g++ does not know c++1z yet, there's not much else you can do.

Niko Hallikainen

@I.C.Wiener I have now this problem in raspberry pi 3. I try to compile in there qt, but it give this error:

Running configuration tests...
Failed to process makespec for platform 'devices/linux-rasp-pi-g++'
Project ERROR: CROSS_COMPILE needs to be set via -device-option CROSS_COMPILE=<path>
Could not read qmake configuration file /home/pi/qt-everywhere-opensource-src-5.7.0/qtbase/mkspecs/devices/linux-rasp-pi-g++/qmake.conf.
Error processing project file: /dev/null

My configure is:

./configure -v -xcb -tslib -force-pkg-config -device linux-rasp-pi-g++ -opensource -confirm-license -optimized-qmake -reduce-exports -release -qt-pcre -make libs  -prefix /usr/local/qt5 2>&1 | tee config.out

Niko Hallikainen

@I.C.Wiener I try to change that line, but now I get this error:

Symbolic function binding disabled.
checking for C++11...
/usr/bin/g++ -c -march=armv8-a+crc -mtune=cortex-a53 -mfpu=crypto-neon-fp-armv8 -pipe -Os -mthumb -std=c++1z -mfloat-abi=hard -O2 -std=gnu++11 -Wall -W -fPIC  -I. -I../../../mkspecs/devices/linux-rpi3-g++ -o c++11.o c++11.cpp
g++: error: unrecognized command line option â-std=c++1zâ
Makefile:417: recipe for target 'c++11.o' failed
make: *** [c++11.o] Error 1
C++11 disabled.
ERROR: Qt requires a C++11 compiler and yours does not seem to be that.
Please upgrade.

How I can fix this?

shivaVMC

@Niko-Hallikainen
I too stuckup with the same issue,can you please help on the same.1 day wasted on the same error.it would be great help for me on ur suggestion.

Thanks In advance

Pablo J. Rogina

@shivaVMC what about following this guide?

shivaVMC

@Pablo-J.-Rogina
I followed the complete procedure as per below link,Just changed the V_5.7.1 to my V_5.7.0
https://lb.raspberrypi.org/forums/viewtopic.php?t=204529
Still I m having the same issue can you please help me out on this,Almost I have spent 8 Houors on sorting this error.It will a kind support to reduce me tension.

Thanks In advance

shivaVMC

@Pablo-J.-Rogina
Initially I was following that guide only,but I failed at beloe step
git clone git://code.qt.io/qt/qtbase.git -b linux-rasp-pi3-g++
Cloning into 'qtbase'...
fatal: Remote branch linux-rasp-pi3-g++ not found in upstream origin

Pablo J. Rogina

@shivaVMC said in Qt 5.7 and cross compile:

git clone git://code.qt.io/qt/qtbase.git -b linux-rasp-pi3-g++

You need to specify what Qt branch (i.e. 5.7, ..., 5.10, etc.) you want to clone from Git repository, let's say you want to cross-compile Qt 5.10:

git clone git://code.qt.io/qt/qtbase.git -b 5.10

then you'll have a folder qtbase will all the sources to build Qt 5.10

shivaVMC

@Pablo-J.-Rogina
Hi Rogina,
Thank You,Thanks alot for quick response.
Your Comments/Suggestions are perfect to fix my issue.
Everything Looks fine now and my problem is solved.

Excellent...!!!

shivaVMC

@Pablo-J.-Rogina
HI Again
I m using 2 different version of QT as
my PC installed with QT5.7.0
My Rpi3 Kit installed with QT5.10.1
Now I compiled the code and it went well in my PC,Same ".exe" I run in rpi3kit it gave me an error as below

"cannot execute binary file: Exec format error
Application finished with exit code 126."

Please can you suggest on this.

Where I m going wrong?Is I need to install QT5.10.1 on my PC also?

Pablo J. Rogina

@shivaVMC said in Qt 5.7 and cross compile:

Where I m going wrong?

You are mixing pears and apples :-)

Different Qt versions is not the issue here, the problem is different platform/architecture: your PC is x86 (I assume) while RPi is ARM

Remember that whatever Qt version you use in your RPi you would need to cross-compile in your PC

shivaVMC

@Pablo-J.-Rogina
Hi Rogina,
Finally I m successful in compiling the code and running on my target Board,Thanks alot .

But during runtime,I m facing with below error as
Unable to query physical screen size, defaulting to 100 dpi.
To override, set QT_QPA_EGLFS_PHYSICAL_WIDTH and QT_QPA_EGLFS_PHYSICAL_HEIGHT (in millimeters).
QFontDatabase: Cannot find font directory /usr/local/qt5pi/lib/fonts.
Note that Qt no longer ships fonts. Deploy some (from http://dejavu-fonts.org for example) or switch to fontconfig.
Can you plesae help on this.

sierdzio

@shivaVMC said in Qt 5.7 and cross compile:

Unable to query physical screen size, defaulting to 100 dpi.

This is not an error, you can safely ignore it.

And if you want to solve it, just do what the next line says (export the 2 variables before launching your app).

QFontDatabase: Cannot find font directory /usr/local/qt5pi/lib/fonts.
Note that Qt no longer ships fonts. Deploy some (from http://dejavu-fonts.org for example) or switch to fontconfig.

Here the error message mentions the solution, too. Just do what it says :-) Either put some fonts in the path where Qt is looking for them, or ship your own in a resource (QRC) with your app and install them at runtime.