Cross compiling QT 5.11 for ARM - no device matching $MKSPEC

devjb

Hi there,

I am trying to compile QT for an arm board which I have on my desk. However, I am unable to configure it. After reading some tutorials I came up with the following configure command:

../configure -release -no-gui -device arm-gad-linux-gnueabi-g++ -device-option CROSS_COMPILE=/home/johndoe/opt/gad/R9.0/sysroots/x86_64-gadsdk-linux/usr/bin/arm-gad-linux-gnueabi/arm-gad-linux-gnueabi- -sysroot /home/johndoe/opt/gad/R9.0/sysroots/cortexa9hf-vfp-neon-gad-linux-gnueabi -prefix /home/johndoe/usr/local/qt5

I copied the mkspec for linux-arm-gnueabi-g++ to a new directory arm-gad-linux-gnueabi-g++ and adjusted the config:

MAKEFILE_GENERATOR      = UNIX
CONFIG                 += incremental
QMAKE_INCREMENTAL_STYLE = sublib

include(../common/linux.conf)
include(../common/gcc-base-unix.conf)
include(../common/g++-unix.conf)

# modifications to g++.conf
#arm-gad-linux-gnueabi
QMAKE_CC                = arm-gad-linux-gnueabi-gcc
QMAKE_CXX               = arm-gad-linux-gnueabi-g++
QMAKE_LINK              = arm-gad-linux-gnueabi-g++
QMAKE_LINK_SHLIB        = arm-gad-linux-gnueabi-g++

# modifications to linux.conf
QMAKE_AR                = arm-gad-linux-gnueabi-ar cqs
QMAKE_OBJCOPY           = arm-gad-linux-gnueabi-objcopy
QMAKE_NM                = arm-gad-linux-gnueabi-nm -P
QMAKE_STRIP             = arm-gad-linux-gnueabi-strip
load(qt_config)

However, when I try to configure, this is what the output looks like:

johndoe@e655ff6124da:~/opt/resources/qt-5.11/qt-everywhere-src-5.11.0/build$ ./build.sh 
+ cd qtbase
+ /home/johndoe/opt/resources/qt-5.11/qt-everywhere-src-5.11.0/qtbase/configure -top-level -release -no-gui -device arm-gad-linux-gnueabi-g++ -device-option CROSS_COMPILE=/home/johndoe/opt/gad/R9.0/sysroots/x86_64-gadsdk-linux/usr/bin/arm-gad-linux-gnueabi/arm-gad-linux-gnueabi- -sysroot /home/johndoe/opt/gad/R9.0/sysroots/cortexa9hf-vfp-neon-gad-linux-gnueabi -prefix /home/johndoe/usr/local/qt5
Preparing build tree...
Creating qmake...
.Done.
ERROR: No device matching 'arm-gad-linux-gnueabi-g++'.

I use a docker container as a build environment where I usually compile my c++ code using plain old makefiles.

The environment looks like this:

johndoe@e655ff6124da:~/opt/resources/qt-5.11/qt-everywhere-src-5.11.0/build$ env
AS=arm-gad-linux-gnueabi-as 
OECORE_TARGET_SYSROOT=/home/johndoe/opt/gad/R9.0/sysroots/cortexa9hf-vfp-neon-gad-linux-gnueabi
AR=arm-gad-linux-gnueabi-ar
LDFLAGS=-Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed
TARGET_PREFIX=arm-gad-linux-gnueabi-
HOSTNAME=e655ff6124da
M4=m4
TERM=xterm
NM=arm-gad-linux-gnueabi-nm
CPPFLAGS=
OECORE_DISTRO_VERSION=1.0.0
GDB=arm-gad-linux-gnueabi-gdb
OECORE_SDK_VERSION=1.0.0
LS_COLORS=rs=0:di=01;34:ln=01;36:mh=00:pi=40;33:so=01;35:do=01;35:bd=40;33;01:cd=40;33;01:or=40;31;01:mi=00:su=37;41:sg=30;43:ca=30;41:tw=30;42:ow=34;42:st=37;44:ex=01;32:*.tar=01;31:*.tgz=01;31:*.arc=01;31:*.arj=01;31:*.taz=01;31:*.lha=01;31:*.lz4=01;31:*.lzh=01;31:*.lzma=01;31:*.tlz=01;31:*.txz=01;31:*.tzo=01;31:*.t7z=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.dz=01;31:*.gz=01;31:*.lrz=01;31:*.lz=01;31:*.lzo=01;31:*.xz=01;31:*.bz2=01;31:*.bz=01;31:*.tbz=01;31:*.tbz2=01;31:*.tz=01;31:*.deb=01;31:*.rpm=01;31:*.jar=01;31:*.war=01;31:*.ear=01;31:*.sar=01;31:*.rar=01;31:*.alz=01;31:*.ace=01;31:*.zoo=01;31:*.cpio=01;31:*.7z=01;31:*.rz=01;31:*.cab=01;31:*.jpg=01;35:*.jpeg=01;35:*.gif=01;35:*.bmp=01;35:*.pbm=01;35:*.pgm=01;35:*.ppm=01;35:*.tga=01;35:*.xbm=01;35:*.xpm=01;35:*.tif=01;35:*.tiff=01;35:*.png=01;35:*.svg=01;35:*.svgz=01;35:*.mng=01;35:*.pcx=01;35:*.mov=01;35:*.mpg=01;35:*.mpeg=01;35:*.m2v=01;35:*.mkv=01;35:*.webm=01;35:*.ogm=01;35:*.mp4=01;35:*.m4v=01;35:*.mp4v=01;35:*.vob=01;35:*.qt=01;35:*.nuv=01;35:*.wmv=01;35:*.asf=01;35:*.rm=01;35:*.rmvb=01;35:*.flc=01;35:*.avi=01;35:*.fli=01;35:*.flv=01;35:*.gl=01;35:*.dl=01;35:*.xcf=01;35:*.xwd=01;35:*.yuv=01;35:*.cgm=01;35:*.emf=01;35:*.ogv=01;35:*.ogx=01;35:*.aac=00;36:*.au=00;36:*.flac=00;36:*.m4a=00;36:*.mid=00;36:*.midi=00;36:*.mka=00;36:*.mp3=00;36:*.mpc=00;36:*.ogg=00;36:*.ra=00;36:*.wav=00;36:*.oga=00;36:*.opus=00;36:*.spx=00;36:*.xspf=00;36:
PKG_CONFIG_SYSROOT_DIR=/home/johndoe/opt/gad/R9.0/sysroots/cortexa9hf-vfp-neon-gad-linux-gnueabi
CONFIG_SITE=/home/johndoe/opt/gad/R9.0/site-config-cortexa9hf-vfp-neon-gad-linux-gnueabi
CXXFLAGS= -O2 -pipe -g -feliminate-unused-debug-types
CPP=arm-gad-linux-gnueabi-gcc -E  -march=armv7-a -mthumb-interwork -mfloat-abi=hard -mfpu=neon -mtune=cortex-a9 --sysroot=/home/johndoe/opt/gad/R9.0/sysroots/cortexa9hf-vfp-neon-gad-linux-gnueabi
PATH=/home/johndoe/opt/gad/R9.0/sysroots/x86_64-gadsdk-linux/usr/bin:/home/johndoe/opt/gad/R9.0/sysroots/x86_64-gadsdk-linux/usr/bin/arm-gad-linux-gnueabi:/home/johndoe/opt/python-virtual/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
LD=arm-gad-linux-gnueabi-ld  --sysroot=/home/johndoe/opt/gad/R9.0/sysroots/cortexa9hf-vfp-neon-gad-linux-gnueabi
PWD=/home/johndoe/opt/resources/qt-5.11/qt-everywhere-src-5.11.0/build
STRIP=arm-gad-linux-gnueabi-strip
LANG=C.UTF-8
OECORE_NATIVE_SYSROOT=/home/johndoe/opt/gad/R9.0/sysroots/x86_64-gadsdk-linux
PYTHONHOME=/home/johndoe/opt/gad/R9.0/sysroots/x86_64-gadsdk-linux/usr
CONFIGURE_FLAGS=--target=arm-gad-linux-gnueabi --host=arm-gad-linux-gnueabi --build=x86_64-linux --with-libtool-sysroot=/home/johndoe/opt/gad/R9.0/sysroots/cortexa9hf-vfp-neon-gad-linux-gnueabi
CXX=arm-gad-linux-gnueabi-g++  -march=armv7-a -mthumb-interwork -mfloat-abi=hard -mfpu=neon -mtune=cortex-a9 --sysroot=/home/johndoe/opt/gad/R9.0/sysroots/cortexa9hf-vfp-neon-gad-linux-gnueabi
OBJCOPY=arm-gad-linux-gnueabi-objcopy
HOME=/home/johndoe
SHLVL=2
CFLAGS= -O2 -pipe -g -feliminate-unused-debug-types
DEBIAN_FRONTEND=noninteractive
OECORE_ACLOCAL_OPTS=-I /home/johndoe/opt/gad/R9.0/sysroots/x86_64-gadsdk-linux/usr/share/aclocal
PKG_CONFIG_PATH=/home/johndoe/opt/gad/R9.0/sysroots/cortexa9hf-vfp-neon-gad-linux-gnueabi/usr/lib/pkgconfig
RANLIB=arm-gad-linux-gnueabi-ranlib
ARCH=arm
CC=arm-gad-linux-gnueabi-gcc  -march=armv7-a -mthumb-interwork -mfloat-abi=hard -mfpu=neon -mtune=cortex-a9 --sysroot=/home/johndoe/opt/gad/R9.0/sysroots/cortexa9hf-vfp-neon-gad-linux-gnueabi
CROSS_COMPILE=arm-gad-linux-gnueabi-
OBJDUMP=arm-gad-linux-gnueabi-objdump
SDKTARGETSYSROOT=/home/johndoe/opt/gad/R9.0/sysroots/cortexa9hf-vfp-neon-gad-linux-gnueabi
_=/usr/bin/env
OLDPWD=/home/johndoe/opt/resources/qt-5.11/qt-everywhere-src-5.11.0

Any hints what I am doing wrong? Please ask for additional information if required.

Thanks in advance

Jochen

SGaist

Hi,

From what you wrote you copied a "top level" mkspec in the same folder. The device related mkspecs are under the devices folder.

devjb

That was the right hint! Thank you. I copied my mkspec folder to ./devices and the configuration went on!

Solved Cross compiling QT 5.11 for ARM - no device matching $MKSPEC