Problems about Native build Qt5.7 on raspberry pi3
-
@JiujiuTong add -skip wayland to your configure call
@jsulm
the problem is solved with -skip wayland option
but another problem happens:
the make install output error
/usr/bin/ld: cannot find -lclip2tri
/usr/bin/ld: cannot find -lpoly2tri
/usr/bin/ld: cannot find -lclipper
I know it means that three libs are not find, but there are tips above:
cd poly2tri/ && ( test -e Makefile || /home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/bin/qmake /home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtlocation/src/3rdparty/poly2tri/poly2tri.pro -qtconf /home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/bin/qt.conf -o Makefile ) && make -f Makefile install
make[4]: Entering directory '/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtlocation/src/3rdparty/poly2tri'
make[4]: Nothing to be done for 'install'.
make[4]: Leaving directory '/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtlocation/src/3rdparty/poly2tri'
cd clipper/ && ( test -e Makefile || /home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/bin/qmake /home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtlocation/src/3rdparty/clipper/clipper.pro -qtconf /home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/bin/qt.conf -o Makefile ) && make -f Makefile install
make[4]: Entering directory '/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtlocation/src/3rdparty/clipper'
make[4]: Nothing to be done for 'install'.
make[4]: Leaving directory '/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtlocation/src/3rdparty/clipper'
cd clip2tri/ && ( test -e Makefile || /home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/bin/qmake /home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtlocation/src/3rdparty/clip2tri/clip2tri.pro -qtconf /home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/bin/qt.conf -o Makefile ) && make -f Makefile install
make[4]: Entering directory '/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtlocation/src/3rdparty/clip2tri'
make[4]: Nothing to be done for 'install'.
make[4]: Leaving directory '/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtlocation/src/3rdparty/clip2tri'
make[3]: Leaving directory '/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtlocation/src/3rdparty'it seams that the install process skip producing the libs,but later it need the libs, can you give any suggestions? thank you !
-
@jsulm
the problem is solved with -skip wayland option
but another problem happens:
the make install output error
/usr/bin/ld: cannot find -lclip2tri
/usr/bin/ld: cannot find -lpoly2tri
/usr/bin/ld: cannot find -lclipper
I know it means that three libs are not find, but there are tips above:
cd poly2tri/ && ( test -e Makefile || /home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/bin/qmake /home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtlocation/src/3rdparty/poly2tri/poly2tri.pro -qtconf /home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/bin/qt.conf -o Makefile ) && make -f Makefile install
make[4]: Entering directory '/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtlocation/src/3rdparty/poly2tri'
make[4]: Nothing to be done for 'install'.
make[4]: Leaving directory '/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtlocation/src/3rdparty/poly2tri'
cd clipper/ && ( test -e Makefile || /home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/bin/qmake /home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtlocation/src/3rdparty/clipper/clipper.pro -qtconf /home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/bin/qt.conf -o Makefile ) && make -f Makefile install
make[4]: Entering directory '/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtlocation/src/3rdparty/clipper'
make[4]: Nothing to be done for 'install'.
make[4]: Leaving directory '/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtlocation/src/3rdparty/clipper'
cd clip2tri/ && ( test -e Makefile || /home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/bin/qmake /home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtlocation/src/3rdparty/clip2tri/clip2tri.pro -qtconf /home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/bin/qt.conf -o Makefile ) && make -f Makefile install
make[4]: Entering directory '/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtlocation/src/3rdparty/clip2tri'
make[4]: Nothing to be done for 'install'.
make[4]: Leaving directory '/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtlocation/src/3rdparty/clip2tri'
make[3]: Leaving directory '/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtlocation/src/3rdparty'it seams that the install process skip producing the libs,but later it need the libs, can you give any suggestions? thank you !
@JiujiuTong I don't know why those libs are not installed, but you can try to copy them manually
-
@JiujiuTong I don't know why those libs are not installed, but you can try to copy them manually
-
@jsulm
where can i find these libs? it seems that there are no libs created.....@JiujiuTong They actually should be built:
cd poly2tri/ && ( test -e Makefile || /home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/bin/qmake /home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtlocation/src/3rdparty/poly2tri/poly2tri.pro -qtconf /home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/bin/qt.conf -o Makefile -
@JiujiuTong They actually should be built:
cd poly2tri/ && ( test -e Makefile || /home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/bin/qmake /home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtlocation/src/3rdparty/poly2tri/poly2tri.pro -qtconf /home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/bin/qt.conf -o Makefile@jsulm
OK, I will double confirm it.
after copy them manually, i would reinstalll again. thanks a lot! -
@JiujiuTong They actually should be built:
cd poly2tri/ && ( test -e Makefile || /home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/bin/qmake /home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtlocation/src/3rdparty/poly2tri/poly2tri.pro -qtconf /home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/bin/qt.conf -o MakefileThis post is deleted! -
@JiujiuTong They actually should be built:
cd poly2tri/ && ( test -e Makefile || /home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/bin/qmake /home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtlocation/src/3rdparty/poly2tri/poly2tri.pro -qtconf /home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/bin/qt.conf -o Makefile -
@jsulm
i checked the files , there are three files:
libclip2tri.prl
libclipper.prl
libpoly2tri.prlbut no lib files. it's strange...
do you have any other suggestions ? thankyou!@JiujiuTong You can try to build those libraries manually:
cd poly2tri /home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/bin/qmake /home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtlocation/src/3rdparty/poly2tri/poly2tri.pro -qtconf /home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/bin/qt.conf -o Makefilethen make and make install
-
@JiujiuTong You can try to build those libraries manually:
cd poly2tri /home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/bin/qmake /home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtlocation/src/3rdparty/poly2tri/poly2tri.pro -qtconf /home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/bin/qt.conf -o Makefilethen make and make install
This post is deleted! -
@JiujiuTong You can try to build those libraries manually:
cd poly2tri /home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/bin/qmake /home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtlocation/src/3rdparty/poly2tri/poly2tri.pro -qtconf /home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/bin/qt.conf -o Makefilethen make and make install
@jsulm
yes , i have create the libs,thank you !! -
@JiujiuTong You can try to build those libraries manually:
cd poly2tri /home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/bin/qmake /home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtlocation/src/3rdparty/poly2tri/poly2tri.pro -qtconf /home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/bin/qt.conf -o Makefilethen make and make install
-
@jsulm
after i've create the archives(libclip2tri.a, libclipper.a,libpoly2tri.a ) ,then copy them to /usr/lib
and restart the QT configuer and make then make install, is it right ?@JiujiuTong *.a are static libraries, those are usually not in /usr/lib as they are only needed during linking, but you can try.
Actually you should copy them to the directory where you want to install your Qt. -
@JiujiuTong *.a are static libraries, those are usually not in /usr/lib as they are only needed during linking, but you can try.
Actually you should copy them to the directory where you want to install your Qt.@jsulm
thank you!
this problem solved, but another issue happened:
make[3]: Entering directory '/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtscript/src/script'
/usr/bin/g++ -c -include .pch/Qt5Script -march=armv8-a -mtune=cortex-a53 -mfpu=crypto-neon-fp-armv8 -mfloat-abi=hard -fno-strict-aliasing -Wall -Wreturn-type -Wcast-align -Wchar-subscripts -Wformat-security -Wreturn-type -Wno-unused-parameter -Wno-sign-compare -Wno-switch -Wno-switch-enum -Wundef -Wmissing-noreturn -Winit-self -fno-stack-protector -O2 -std=c++1y -fvisibility=hidden -fvisibility-inlines-hidden -fno-exceptions -D_REENTRANT -fPIC -DJSC=QTJSC -Djscyyparse=qtjscyyparse -Djscyylex=qtjscyylex -Djscyyerror=qtjscyyerror -DWTF=QTWTF -DQT_NO_USING_NAMESPACE -DQLALR_NO_QSCRIPTGRAMMAR_DEBUG_INFO -DBUILDING_QT__=1 -DWTF_USE_ACCELERATED_COMPOSITING -DNDEBUG -DLOG_DISABLED=1 -DBUILDING_QT__ -DBUILDING_JavaScriptCore -DBUILDING_WTF -DWTF_USE_JAVASCRIPTCORE_BINDINGS=1 -DWTF_CHANGES=1 -DJS_NO_EXPORT -DQT_BUILD_SCRIPT_LIB -DQT_BUILDING_QT -DQT_NO_CAST_TO_ASCII -DQT_ASCII_CAST_WARNINGS -DQT_MOC_COMPAT -DQT_USE_QSTRINGBUILDER -DQT_DEPRECATED_WARNINGS -DQT_DISABLE_DEPRECATED_BEFORE=0x050000 -DQT_NO_EXCEPTIONS -D_LARGEFILE64_SOURCE -D_LARGEFILE_SOURCE -DQT_NO_DEBUG -DQT_CORE_LIB -I. -I../3rdparty/javascriptcore/JavaScriptCore -I../3rdparty/javascriptcore -I../3rdparty/javascriptcore/JavaScriptCore/assembler -I../3rdparty/javascriptcore/JavaScriptCore/bytecode -I../3rdparty/javascriptcore/JavaScriptCore/bytecompiler -I../3rdparty/javascriptcore/JavaScriptCore/debugger -I../3rdparty/javascriptcore/JavaScriptCore/interpreter -I../3rdparty/javascriptcore/JavaScriptCore/jit -I../3rdparty/javascriptcore/JavaScriptCore/parser -I../3rdparty/javascriptcore/JavaScriptCore/pcre -I../3rdparty/javascriptcore/JavaScriptCore/profiler -I../3rdparty/javascriptcore/JavaScriptCore/runtime -I../3rdparty/javascriptcore/JavaScriptCore/wrec -I../3rdparty/javascriptcore/JavaScriptCore/wtf -I../3rdparty/javascriptcore/JavaScriptCore/wtf/symbian -I../3rdparty/javascriptcore/JavaScriptCore/wtf/unicode -I../3rdparty/javascriptcore/JavaScriptCore/yarr -I../3rdparty/javascriptcore/JavaScriptCore/API -I../3rdparty/javascriptcore/JavaScriptCore/ForwardingHeaders -I../3rdparty/javascriptcore/JavaScriptCore/generated -I/opt/vc/include -I/opt/vc/include/interface/vcos -I/opt/vc/include/interface/vcos/pthreads -I/opt/vc/include/interface/vmcs_host/linux -I/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtscript/src/3rdparty/javascriptcore/WebKit/qt/Api -I../3rdparty/javascriptcore/JavaScriptCore/pcre -I/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtscript/src/3rdparty/javascriptcore/JavaScriptCore/tmp -I. -Iparser -I../../include -I../../include/QtScript -I../../include/QtScript/5.7.1 -I../../include/QtScript/5.7.1/QtScript -I/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/include/QtCore/5.7.1 -I/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/include/QtCore/5.7.1/QtCore -I/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/include -I/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/include/QtCore -I.moc -I/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/mkspecs/devices/linux-rpi3-g++ -o obj/release/pcre_compile.o ../3rdparty/javascriptcore/JavaScriptCore/pcre/pcre_compile.cpp
In file included from ../3rdparty/javascriptcore/JavaScriptCore/config.h:26:0,
from ../3rdparty/javascriptcore/JavaScriptCore/pcre/pcre_compile.cpp:44:
../3rdparty/javascriptcore/JavaScriptCore/wtf/Platform.h:370:6: error: #error "Not supported ARM architecture"error "Not supported ARM architecture"
I am frustrated..i am following the steps :
http://wiki.qt.io/Native_Build_of_Qt_5.4.1_on_a_Raspberry_Pi
why so many problems ? do you have any good ideas ? thank you ! -
@jsulm
thank you!
this problem solved, but another issue happened:
make[3]: Entering directory '/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtscript/src/script'
/usr/bin/g++ -c -include .pch/Qt5Script -march=armv8-a -mtune=cortex-a53 -mfpu=crypto-neon-fp-armv8 -mfloat-abi=hard -fno-strict-aliasing -Wall -Wreturn-type -Wcast-align -Wchar-subscripts -Wformat-security -Wreturn-type -Wno-unused-parameter -Wno-sign-compare -Wno-switch -Wno-switch-enum -Wundef -Wmissing-noreturn -Winit-self -fno-stack-protector -O2 -std=c++1y -fvisibility=hidden -fvisibility-inlines-hidden -fno-exceptions -D_REENTRANT -fPIC -DJSC=QTJSC -Djscyyparse=qtjscyyparse -Djscyylex=qtjscyylex -Djscyyerror=qtjscyyerror -DWTF=QTWTF -DQT_NO_USING_NAMESPACE -DQLALR_NO_QSCRIPTGRAMMAR_DEBUG_INFO -DBUILDING_QT__=1 -DWTF_USE_ACCELERATED_COMPOSITING -DNDEBUG -DLOG_DISABLED=1 -DBUILDING_QT__ -DBUILDING_JavaScriptCore -DBUILDING_WTF -DWTF_USE_JAVASCRIPTCORE_BINDINGS=1 -DWTF_CHANGES=1 -DJS_NO_EXPORT -DQT_BUILD_SCRIPT_LIB -DQT_BUILDING_QT -DQT_NO_CAST_TO_ASCII -DQT_ASCII_CAST_WARNINGS -DQT_MOC_COMPAT -DQT_USE_QSTRINGBUILDER -DQT_DEPRECATED_WARNINGS -DQT_DISABLE_DEPRECATED_BEFORE=0x050000 -DQT_NO_EXCEPTIONS -D_LARGEFILE64_SOURCE -D_LARGEFILE_SOURCE -DQT_NO_DEBUG -DQT_CORE_LIB -I. -I../3rdparty/javascriptcore/JavaScriptCore -I../3rdparty/javascriptcore -I../3rdparty/javascriptcore/JavaScriptCore/assembler -I../3rdparty/javascriptcore/JavaScriptCore/bytecode -I../3rdparty/javascriptcore/JavaScriptCore/bytecompiler -I../3rdparty/javascriptcore/JavaScriptCore/debugger -I../3rdparty/javascriptcore/JavaScriptCore/interpreter -I../3rdparty/javascriptcore/JavaScriptCore/jit -I../3rdparty/javascriptcore/JavaScriptCore/parser -I../3rdparty/javascriptcore/JavaScriptCore/pcre -I../3rdparty/javascriptcore/JavaScriptCore/profiler -I../3rdparty/javascriptcore/JavaScriptCore/runtime -I../3rdparty/javascriptcore/JavaScriptCore/wrec -I../3rdparty/javascriptcore/JavaScriptCore/wtf -I../3rdparty/javascriptcore/JavaScriptCore/wtf/symbian -I../3rdparty/javascriptcore/JavaScriptCore/wtf/unicode -I../3rdparty/javascriptcore/JavaScriptCore/yarr -I../3rdparty/javascriptcore/JavaScriptCore/API -I../3rdparty/javascriptcore/JavaScriptCore/ForwardingHeaders -I../3rdparty/javascriptcore/JavaScriptCore/generated -I/opt/vc/include -I/opt/vc/include/interface/vcos -I/opt/vc/include/interface/vcos/pthreads -I/opt/vc/include/interface/vmcs_host/linux -I/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtscript/src/3rdparty/javascriptcore/WebKit/qt/Api -I../3rdparty/javascriptcore/JavaScriptCore/pcre -I/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtscript/src/3rdparty/javascriptcore/JavaScriptCore/tmp -I. -Iparser -I../../include -I../../include/QtScript -I../../include/QtScript/5.7.1 -I../../include/QtScript/5.7.1/QtScript -I/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/include/QtCore/5.7.1 -I/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/include/QtCore/5.7.1/QtCore -I/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/include -I/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/include/QtCore -I.moc -I/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/mkspecs/devices/linux-rpi3-g++ -o obj/release/pcre_compile.o ../3rdparty/javascriptcore/JavaScriptCore/pcre/pcre_compile.cpp
In file included from ../3rdparty/javascriptcore/JavaScriptCore/config.h:26:0,
from ../3rdparty/javascriptcore/JavaScriptCore/pcre/pcre_compile.cpp:44:
../3rdparty/javascriptcore/JavaScriptCore/wtf/Platform.h:370:6: error: #error "Not supported ARM architecture"error "Not supported ARM architecture"
I am frustrated..i am following the steps :
http://wiki.qt.io/Native_Build_of_Qt_5.4.1_on_a_Raspberry_Pi
why so many problems ? do you have any good ideas ? thank you !@JiujiuTong said in problems about Native build Qt5.7 on raspberry pi3:
@jsulm
thank you!more infos:
error "Not supported ARM architecture"
../3rdparty/javascriptcore/JavaScriptCore/pcre/pcre_compile.cpp: In function ‘JSRegExp* jsRegExpCompile(const UChar*, int, JSRegExpIgnoreCaseOption, JSRegExpMultilineOption, unsigned int*, const char**)’:
../3rdparty/javascriptcore/JavaScriptCore/pcre/pcre_compile.cpp:2590:62: warning: cast from ‘char*’ to ‘JSRegExp*’ increases required alignment of target type [-Wcast-align]
JSRegExp* re = reinterpret_cast<JSRegExp*>(new char[size]);
^
In file included from /home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/include/QtCore/qlist.h:1:0,
from /home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/include/QtCore/../../src/corelib/kernel/qobject.h:49,
from /home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/include/QtCore/qobject.h:1,
from /home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/include/QtCore/../../src/corelib/animation/qabstractanimation.h:43,
from /home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/include/QtCore/qabstractanimation.h:1,
from /home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/include/QtCore/QtCore:4,
from ../../include/QtScript/QtScriptDepends:3:
/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/include/QtCore/../../src/corelib/tools/qlist.h: In instantiation of ‘void QList<T>::node_copy(QList<T>::Node*, QList<T>::Node*, QList<T>::Node*) [with T = QVariant]’:
/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/include/QtCore/../../src/corelib/tools/qlist.h:811:58: required from ‘QList<T>::QList(const QList<T>&) [with T = QVariant]’
/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/include/QtCore/../../src/corelib/statemachine/qstatemachine.h:77:59: required from here
/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/include/QtCore/../../src/corelib/tools/qlist.h:471:17: warning: cast from ‘QList<QVariant>::Node*’ to ‘QVariant*’ increases required alignment of target type [-Wcast-align]
new (current) T(reinterpret_cast<T>(src));
^
/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/include/QtCore/../../src/corelib/tools/qlist.h:477:17: warning: cast from ‘QList<QVariant>::Node*’ to ‘QVariant*’ increases required alignment of target type [-Wcast-align]
(reinterpret_cast<T*>(current))->~T();
^
/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/include/QtCore/../../src/corelib/tools/qlist.h: In instantiation of ‘void QList<T>::node_destruct(QList<T>::Node*, QList<T>::Node*) [with T = QVariant]’:
/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/include/QtCore/../../src/corelib/tools/qlist.h:862:68: required from ‘void QList<T>::dealloc(QListData::Data*) [with T = QVariant]’
/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/include/QtCore/../../src/corelib/tools/qlist.h:823:18: required from ‘QList<T>::~QList() [with T = QVariant]’
/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/include/QtCore/../../src/corelib/kernel/qvariant.h:762:30: required from here
/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/include/QtCore/../../src/corelib/tools/qlist.h:492:34: warning: cast from ‘QList<QVariant>::Node*’ to ‘QVariant*’ increases required alignment of target type [-Wcast-align]
while (from != to) --to, reinterpret_cast<T*>(to)->~T();
^
/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/include/QtCore/../../src/corelib/tools/qlist.h: In instantiation of ‘void QList<T>::node_destruct(QList<T>::Node*) [with T = QVariant]’:
/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/include/QtCore/../../src/corelib/tools/qlist.h:600:36: required from ‘void QList<T>::append(const T&) [with T = QVariant]’
/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/include/QtCore/../../src/corelib/tools/qlist.h:382:15: required from ‘QList<T>& QList<T>::operator<<(const T&) [with T = QVariant]’
/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/include/QtCore/../../src/corelib/kernel/qvariant.h:765:27: required from here
/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/include/QtCore/../../src/corelib/tools/qlist.h:448:39: warning: cast from ‘QList<QVariant>::Node*’ to ‘QVariant*’ increases required alignment of target type [-Wcast-align]
else if (QTypeInfo<T>::isComplex) reinterpret_cast<T*>(n)->~T();
^
In file included from /home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/include/QtCore/qhash.h:1:0,
from /home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/include/QtCore/../../src/corelib/kernel/qvariant.h:48,
from /home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/include/QtCore/qvariant.h:1,
from /home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/include/QtCore/../../src/corelib/animation/qvariantanimation.h:46,
from /home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/include/QtCore/qvariantanimation.h:1,
from /home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/include/QtCore/../../src/corelib/animation/qpropertyanimation.h:43,
from /home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/include/QtCore/qpropertyanimation.h:1,
from /home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/include/QtCore/QtCore:8,
from ../../include/QtScript/QtScriptDepends:3:
/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/include/QtCore/../../src/corelib/tools/qhash.h: In instantiation of ‘static QHash<K, V>::Node* QHash<K, V>::concrete(QHashData::Node*) [with Key = QString; T = QVariant; QHash<K, V>::Node = QHashNode<QString, QVariant>]’:
/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/include/QtCore/../../src/corelib/tools/qhash.h:533:18: required from ‘static void QHash<K, V>::deleteNode2(QHashData::Node*) [with Key = QString; T = QVariant]’
/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/include/QtCore/../../src/corelib/tools/qhash.h:573:5: required from ‘void QHash<K, V>::freeData(QHashData*) [with Key = QString; T = QVariant]’
/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/include/QtCore/../../src/corelib/tools/qhash.h:252:47: required from ‘QHash<K, V>::~QHash() [with Key = QString; T = QVariant]’
/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/include/QtCore/../../src/corelib/kernel/qvariant.h:779:30: required from here
/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/include/QtCore/../../src/corelib/tools/qhash.h:235:45: warning: cast from ‘QHashData::Node*’ to ‘QHash<QString, QVariant>::Node* {aka QHashNode<QString, QVariant>*}’ increases required alignment of target type [-Wcast-align]
return reinterpret_cast<Node *>(node);
^
Makefile:3214: recipe for target 'obj/release/pcre_compile.o' failed
make[3]: *** [obj/release/pcre_compile.o] Error 1
make[3]: Leaving directory '/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtscript/src/script'
Makefile:67: recipe for target 'sub-script-install_subtargets-ordered' failed
make[2]: *** [sub-script-install_subtargets-ordered] Error 2
make[2]: Leaving directory '/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtscript/src'
Makefile:56: recipe for target 'sub-src-install_subtargets' failed
make[1]: *** [sub-src-install_subtargets] Error 2
make[1]: Leaving directory '/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtscript'
Makefile:894: recipe for target 'module-qtscript-install_subtargets' failed
make: *** [module-qtscript-install_subtargets] Error 2 -
@JiujiuTong said in problems about Native build Qt5.7 on raspberry pi3:
@jsulm
thank you!more infos:
error "Not supported ARM architecture"
../3rdparty/javascriptcore/JavaScriptCore/pcre/pcre_compile.cpp: In function ‘JSRegExp* jsRegExpCompile(const UChar*, int, JSRegExpIgnoreCaseOption, JSRegExpMultilineOption, unsigned int*, const char**)’:
../3rdparty/javascriptcore/JavaScriptCore/pcre/pcre_compile.cpp:2590:62: warning: cast from ‘char*’ to ‘JSRegExp*’ increases required alignment of target type [-Wcast-align]
JSRegExp* re = reinterpret_cast<JSRegExp*>(new char[size]);
^
In file included from /home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/include/QtCore/qlist.h:1:0,
from /home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/include/QtCore/../../src/corelib/kernel/qobject.h:49,
from /home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/include/QtCore/qobject.h:1,
from /home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/include/QtCore/../../src/corelib/animation/qabstractanimation.h:43,
from /home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/include/QtCore/qabstractanimation.h:1,
from /home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/include/QtCore/QtCore:4,
from ../../include/QtScript/QtScriptDepends:3:
/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/include/QtCore/../../src/corelib/tools/qlist.h: In instantiation of ‘void QList<T>::node_copy(QList<T>::Node*, QList<T>::Node*, QList<T>::Node*) [with T = QVariant]’:
/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/include/QtCore/../../src/corelib/tools/qlist.h:811:58: required from ‘QList<T>::QList(const QList<T>&) [with T = QVariant]’
/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/include/QtCore/../../src/corelib/statemachine/qstatemachine.h:77:59: required from here
/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/include/QtCore/../../src/corelib/tools/qlist.h:471:17: warning: cast from ‘QList<QVariant>::Node*’ to ‘QVariant*’ increases required alignment of target type [-Wcast-align]
new (current) T(reinterpret_cast<T>(src));
^
/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/include/QtCore/../../src/corelib/tools/qlist.h:477:17: warning: cast from ‘QList<QVariant>::Node*’ to ‘QVariant*’ increases required alignment of target type [-Wcast-align]
(reinterpret_cast<T*>(current))->~T();
^
/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/include/QtCore/../../src/corelib/tools/qlist.h: In instantiation of ‘void QList<T>::node_destruct(QList<T>::Node*, QList<T>::Node*) [with T = QVariant]’:
/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/include/QtCore/../../src/corelib/tools/qlist.h:862:68: required from ‘void QList<T>::dealloc(QListData::Data*) [with T = QVariant]’
/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/include/QtCore/../../src/corelib/tools/qlist.h:823:18: required from ‘QList<T>::~QList() [with T = QVariant]’
/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/include/QtCore/../../src/corelib/kernel/qvariant.h:762:30: required from here
/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/include/QtCore/../../src/corelib/tools/qlist.h:492:34: warning: cast from ‘QList<QVariant>::Node*’ to ‘QVariant*’ increases required alignment of target type [-Wcast-align]
while (from != to) --to, reinterpret_cast<T*>(to)->~T();
^
/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/include/QtCore/../../src/corelib/tools/qlist.h: In instantiation of ‘void QList<T>::node_destruct(QList<T>::Node*) [with T = QVariant]’:
/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/include/QtCore/../../src/corelib/tools/qlist.h:600:36: required from ‘void QList<T>::append(const T&) [with T = QVariant]’
/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/include/QtCore/../../src/corelib/tools/qlist.h:382:15: required from ‘QList<T>& QList<T>::operator<<(const T&) [with T = QVariant]’
/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/include/QtCore/../../src/corelib/kernel/qvariant.h:765:27: required from here
/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/include/QtCore/../../src/corelib/tools/qlist.h:448:39: warning: cast from ‘QList<QVariant>::Node*’ to ‘QVariant*’ increases required alignment of target type [-Wcast-align]
else if (QTypeInfo<T>::isComplex) reinterpret_cast<T*>(n)->~T();
^
In file included from /home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/include/QtCore/qhash.h:1:0,
from /home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/include/QtCore/../../src/corelib/kernel/qvariant.h:48,
from /home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/include/QtCore/qvariant.h:1,
from /home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/include/QtCore/../../src/corelib/animation/qvariantanimation.h:46,
from /home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/include/QtCore/qvariantanimation.h:1,
from /home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/include/QtCore/../../src/corelib/animation/qpropertyanimation.h:43,
from /home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/include/QtCore/qpropertyanimation.h:1,
from /home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/include/QtCore/QtCore:8,
from ../../include/QtScript/QtScriptDepends:3:
/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/include/QtCore/../../src/corelib/tools/qhash.h: In instantiation of ‘static QHash<K, V>::Node* QHash<K, V>::concrete(QHashData::Node*) [with Key = QString; T = QVariant; QHash<K, V>::Node = QHashNode<QString, QVariant>]’:
/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/include/QtCore/../../src/corelib/tools/qhash.h:533:18: required from ‘static void QHash<K, V>::deleteNode2(QHashData::Node*) [with Key = QString; T = QVariant]’
/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/include/QtCore/../../src/corelib/tools/qhash.h:573:5: required from ‘void QHash<K, V>::freeData(QHashData*) [with Key = QString; T = QVariant]’
/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/include/QtCore/../../src/corelib/tools/qhash.h:252:47: required from ‘QHash<K, V>::~QHash() [with Key = QString; T = QVariant]’
/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/include/QtCore/../../src/corelib/kernel/qvariant.h:779:30: required from here
/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtbase/include/QtCore/../../src/corelib/tools/qhash.h:235:45: warning: cast from ‘QHashData::Node*’ to ‘QHash<QString, QVariant>::Node* {aka QHashNode<QString, QVariant>*}’ increases required alignment of target type [-Wcast-align]
return reinterpret_cast<Node *>(node);
^
Makefile:3214: recipe for target 'obj/release/pcre_compile.o' failed
make[3]: *** [obj/release/pcre_compile.o] Error 1
make[3]: Leaving directory '/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtscript/src/script'
Makefile:67: recipe for target 'sub-script-install_subtargets-ordered' failed
make[2]: *** [sub-script-install_subtargets-ordered] Error 2
make[2]: Leaving directory '/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtscript/src'
Makefile:56: recipe for target 'sub-src-install_subtargets' failed
make[1]: *** [sub-src-install_subtargets] Error 2
make[1]: Leaving directory '/home/pi/opt/qt-everywhere-opensource-src-5.7.1/qtscript'
Makefile:894: recipe for target 'module-qtscript-install_subtargets' failed
make: *** [module-qtscript-install_subtargets] Error 2@JiujiuTong In the description how to build Qt for RPi they use this for device: -device linux-rasp-pi-g++
You use -device linux-pi3-g++.
-march=armv8-a -mtune=cortex-a53 - this does not look correct for RPi.
Please try with -device linux-rasp-pi-g++ -
@JiujiuTong In the description how to build Qt for RPi they use this for device: -device linux-rasp-pi-g++
You use -device linux-pi3-g++.
-march=armv8-a -mtune=cortex-a53 - this does not look correct for RPi.
Please try with -device linux-rasp-pi-g++ -
@jsulm
my device is rpi3,
should I use with -device linux-rasp-pi-g++ ?@JiujiuTong Try with -device linux-rasp-pi2-g++
See https://forum.qt.io/topic/68016/rpi3-device-missing/2 -
@JiujiuTong Try with -device linux-rasp-pi2-g++
See https://forum.qt.io/topic/68016/rpi3-device-missing/2@jsulm
well, actually i have tried both with linux-rasp-pi-g++ /linux-pi3-g++.
maybe i should try with linux-rasp-pi2-g++. life is so tough.....
thank you ! -
@JiujiuTong Try with -device linux-rasp-pi2-g++
See https://forum.qt.io/topic/68016/rpi3-device-missing/2@jsulm
an interesting thing is that i following the steps:
http://wiki.qt.io/Native_Build_of_Qt5_on_a_Raspberry_Pi
it is ok now , the problem is that source code for git is same with the release code ?
can i use it for programming ? -
@jsulm
an interesting thing is that i following the steps:
http://wiki.qt.io/Native_Build_of_Qt5_on_a_Raspberry_Pi
it is ok now , the problem is that source code for git is same with the release code ?
can i use it for programming ?@JiujiuTong It depends which branch/tag from Git you use. For each release there is a branch.
