Save Position and Size of the Application Window and load it for the next time
-
@developer_96 Odd. It should work, I use similar code in almost every project and it doesn't matter how you resize, it works.
From what you say though it looks like state is applied properly, the geometry is not (as maximised window is a state thing, not size).
If you're sure there is no typo between save and load of geometry I'd suggest clearing the settings (on Windows this involves registry, so please be careful) and trying again.
Also, you can try to put qDebug() on save and load to verify what is saved and loaded.
IncloseEvent()
:qDebug() << saveGeometry();
In ctor:qDebug() << settings.value("your geometry key").toByteArray();
-
@artwaw
so there is no typo. I'm sure.
Constructor:QSettings settings("MyCompany", "MyApp"); restoreGeometry(settings.value("geometry").toByteArray()); restoreState(settings.value("windowState").toByteArray());
Close Event:
QSettings settings("MyCompany", "MyApp"); settings.setValue("geometry", saveGeometry()); settings.setValue("windowState", saveState()); QMainWindow::closeEvent(event);
What you mean with settings ? Would this solve my problem ?
-
@developer_96
qDebug() will output the data to the console so you can compare them - it might give you a hint what's wrong.I would modify
closeEvent()
though:QSettings settings("MyCompany", "MyApp"); settings.setValue("geometry", saveGeometry()); settings.setValue("windowState", saveState()); settings.sync(); // forces to write the settings to storage event->accept();
And try again.
-
@artwaw tried again. Not working. With debug() after close i got some hexa values. If im loading it, i got nothing. So "" is the only output.
-
@developer_96 said in Save Position and Size of the Application Window and load it for the next time:
So "" is the only output.
This means you load the data from the wrong location. Fix your settings as @artwaw already told you (and not only here in the forum)
-
@developer_96 like @Christian-Ehrlicher said, loader returns empty string which means data is being read from different location.
I'd strongly suggest editingmain.cpp
file like I hinted. Afterwards you just useQSettings settings;
. -
@artwaw @Christian-Ehrlicher i did it already. Modify the cpp like @artwaw said. It doesn't work. I mean if it would be a wrong location the fullscreen mode and the position mode wouldn't work too , or not ?
Regards
-
When the settings object returns an empty QByteArray but you saved a non-empty one you have a typo somewhere. Esp. when the same works for windowState. Check your code!
-
How can i check that it works for windowsState? I mean i commented out the windows state part and the fullscreen and positing changing is still working. If im going to commented out the geometry nothing is working.
@Christian-Ehrlicher Check more times there is no typo.
Hope you can help.
-
Provide a minimal, compilable example.
-
@developer_96 you can use qDebug() to output saved and loaded values to the console, then compare them visually.
-
main.cpp:
QCoreApplication::setOrganizationName("MyCompany"); QCoreApplication::setApplicationName("MyApp"); QApplication oApp(arc, arv);
close event:
QSettings settings("MyCompany", "MyApp"); settings.setValue("geometry", saveGeometry()); settings.setValue("windowState", saveState()); settings.sync(); // forces to write the settings to storage event->accept(); qDebug() << saveGeometry(); qDebug() << saveState();
constructor:
QSettings settings("MyCompany", "MyApp"); restoreGeometry(settings.value("geometry").toByteArray()); restoreState(settings.value("windowState").toByteArray()); qDebug() << settings.value("geometry").toByteArray(); qDebug() << settings.value("windowState").toByteArray();
@artwaw i tried again with debug.
I got for geometry values, compared windows stats and geomtry. Same values in save and loaded. -
@developer_96 Please change QSettings invocation from
QSettings settings("MyCompany", "MyApp");
toQSettings settings;
in ctor and closeEvent()
if you have same values on save and load then this should work. I am out of ideas for now. -
oki i will try it and tell you.
Another question:
How it would work for a qwidget for example?settings.setValue("qwidgetclassname/geometry", saveGeometry()); restoreGeometry(settings.value("qwidgetclassname/geometry").toByteArray()); `` Maybe like that ??
-
@developer_96 for particular widget it doesn't matter how you name it, string can be anything as long as it's unique. You can group it, you can save series as arrays, QSettings is really powerful.
But if you think of saving and restoring particular widgets let me tell you, there is really only a few cases when you need to do that. Qt way is to put your widgets into layouts on the window class and let Qt figure out sizes and positions once you restore global settings and state.
What's worth saving is for example when you have widgets placed on QSplitter - then it's worth saving splitter params.
Or sizes of sections of the header in views, should you want to.Saving and restoring every widget's state etc is counter productive, using layouts is the right way.
-
@artwaw right thank you for this info. I have a qtsplitter for two textboxes. So if im going to enlarge one box the other box i going to be smaller. What I want is: If im going to enlarge the one box and close the application, the same size should be there for both boxes.
-
@developer_96 Assuming you've done layouts right all you need to do is save/restore the splitter. I use that method in one of my projects, save/restore looks like this:
closeEvent(): settings.setValue("splitter",ui->splitter->saveState());
and i method loading the UI (can be ctor as well but this needs to be done once global state and geometry are restored):
ui->splitter->restoreState(settings.value("splitter").toByteArray());
Again - this works if you have your layouts done right. Otherwise it might work, it might not.
-
@artwaw nice thank you it is working. Really sad that the other problem is not solved :/
-
@developer_96 it must be something silly. From the code I work on currently:
closeEvent():
QSettings settings; settings.setValue("geo",saveGeometry()); settings.setValue("state",saveState()); settings.setValue("splitter",ui->splitter->saveState()); settings.sync(); event->accept();
Ctor:
QSettings settings; restoreGeometry(settings.value("geo").toByteArray()); restoreState(settings.value("state").toByteArray()); ui->splitter->restoreState(settings.value("splitter").toByteArray());
-
@artwaw i solved it ! it was only the problem that i use the methods befor the setupUi method.
Thank you for your help !!