Unsolved Project ERROR: Unknown module(s) in QT: quick
-
Hi,
Device beaglebone Black.git: git clone git://code.qt.io/qt/qtbase.git -b 5.12.4 on target (cross compiler failed gracefully) so I did it on target
configured.
./configure -release -opengl es2 -opensource -confirm-license -no-use-gold-linker -v -no-gbm
set ti up
[9;15]debian@beaglebone:~/towsrc$ qmake -query QT_SYSROOT: QT_INSTALL_PREFIX:/usr/local/Qt-5.12.4 QT_INSTALL_ARCHDATA:/usr/local/Qt-5.12.4 QT_INSTALL_DATA:/usr/local/Qt-5.12.4 QT_INSTALL_DOCS:/usr/local/Qt-5.12.4/doc QT_INSTALL_HEADERS:/usr/local/Qt-5.12.4/include QT_INSTALL_LIBS:/usr/local/Qt-5.12.4/lib QT_INSTALL_LIBEXECS:/usr/local/Qt-5.12.4/libexec QT_INSTALL_BINS:/usr/local/Qt-5.12.4/bin QT_INSTALL_TESTS:/usr/local/Qt-5.12.4/tests QT_INSTALL_PLUGINS:/usr/local/Qt-5.12.4/plugins QT_INSTALL_IMPORTS:/usr/local/Qt-5.12.4/imports QT_INSTALL_QML:/usr/local/Qt-5.12.4/qml QT_INSTALL_TRANSLATIONS:/usr/local/Qt-5.12.4/translations QT_INSTALL_CONFIGURATION:/usr/local/Qt-5.12.4/etc/xdg QT_INSTALL_EXAMPLES:/usr/local/Qt-5.12.4/examples QT_INSTALL_DEMOS:/usr/local/Qt-5.12.4/examples QT_HOST_PREFIX:/usr/local/Qt-5.12.4 QT_HOST_DATA:/usr/local/Qt-5.12.4 QT_HOST_BINS:/usr/local/Qt-5.12.4/bin QT_HOST_LIBS:/usr/local/Qt-5.12.4/lib QMAKE_SPEC:linux-g++ QMAKE_XSPEC:linux-g++ QMAKE_VERSION:3.1 QT_VERSION:5.12.4
Compiling a project having qml
import QtQuick 2.12 import QtQuick.Controls 2.5 import QtQuick.Layouts 1.12 debian@beaglebone:~/towsrc$ qmake Project ERROR: Unknown module(s) in QT: quick debian@beaglebone:~/towsrc$
What is wrong. Thx
-
Hi,
You only built the qtbase module. You also have to compile at least qtdeclarative.
-
Hi,
No such thing qtdeclarativedebian@beaglebone:~/qtbase$ grep qtdeclara* Makefile debian@beaglebone:~/qtbase$
I also cloned https://github.com/qt/qtquickcontrols
debian@beaglebone:~/qtquickcontrols2$ make Some of the required modules (qtHaveModule(quick)) are not available. Skipped.
-
Because you are searching in qtbase.
qtdeclarative is a different module.
If you want to build from git, then you should follow this guide.
-
The git I cloned has only qtbase. I was not aware that there is another git called qt5. The info is quite scattered all over the place.
Thank you.
Will try -
@comarius See "Getting the source code" section in https://wiki.qt.io/Building_Qt_5_from_Git
-
This post is deleted! -
Hi,
Thank you for all of your support. Finally building qt5/<all> gor beaglebone.
-
@comarius said in Project ERROR: Unknown module(s) in QT: quick:
The git I cloned has only qtbase. I was not aware that there is another git called qt5. The info is quite scattered all over the place.
Thank you.
Will try...
All good form the configuration point of view.The compilation fails asking for a feature library ?!?
arm-linux-gnueabihf-g++ -c -pipe -march=armv7-a -mtune=cortex-a8 -mfpu=neon -mthumb -fPIC -march=armv7-a -mtune=cortex-a8 -mfpu=neon -mthumb -fPIC -mfloat-abi=hard --sysroot=/BOARDS/BBB_TOW/ti-linux-kernel-dev/deploy/targetNFS -O2 -O3 -std=c++1z -fvisibility=hidden -fvisibility-inlines-hidden -fno-exceptions -Wall -W -Wvla -Wdate-time -Wshift-overflow=2 -Wduplicated-cond -Wno-stringop-overflow -ffunction-sections -fdata-sections -D_REENTRANT -DQT_NO_NARROWING_CONVERSIONS_IN_CONNECT -DQT_BUILD_SERIALPORT_LIB -DQT_BUILDING_QT -DQT_NO_CAST_TO_ASCII -DQT_ASCII_CAST_WARNINGS -DQT_MOC_COMPAT -DQT_USE_QSTRINGBUILDER -DQT_DEPRECATED_WARNINGS -DQT_DISABLE_DEPRECATED_BEFORE=0x050000 -DQT_NO_EXCEPTIONS -D_LARGEFILE64_SOURCE -D_LARGEFILE_SOURCE -DQT_NO_DEBUG -DQT_CORE_LIB -I. -I. -I../../include -I../../include/QtSerialPort -I../../include/QtSerialPort/5.12.4 -I../../include/QtSerialPort/5.12.4/QtSerialPort -I/BOARDS/BBB_TOW/ti-linux-kernel-dev/qt5/qtbase/include/QtCore/5.12.4 -I/BOARDS/BBB_TOW/ti-linux-kernel-dev/qt5/qtbase/include/QtCore/5.12.4/QtCore -I/BOARDS/BBB_TOW/ti-linux-kernel-dev/qt5/qtbase/include -I/BOARDS/BBB_TOW/ti-linux-kernel-dev/qt5/qtbase/include/QtCore -I.moc -I/BOARDS/BBB_TOW/ti-linux-kernel-dev/qt5/qtbase/mkspecs/devices/linux-beagleboard-g++ -o .obj/qserialportinfo_unix.o qserialportinfo_unix.cpp In file included from /BOARDS/BBB_TOW/ti-linux-kernel-dev/qt5/qtbase/include/QtCore/qglobal.h:1:0, from /BOARDS/BBB_TOW/ti-linux-kernel-dev/qt5/qtbase/include/QtCore/../../src/corelib/tools/qalgorithms.h:43, from /BOARDS/BBB_TOW/ti-linux-kernel-dev/qt5/qtbase/include/QtCore/qalgorithms.h:1, from /BOARDS/BBB_TOW/ti-linux-kernel-dev/qt5/qtbase/include/QtCore/../../src/corelib/tools/qlist.h:43, from /BOARDS/BBB_TOW/ti-linux-kernel-dev/qt5/qtbase/include/QtCore/qlist.h:1, from qserialportinfo.h:44, from qserialportinfo_unix.cpp:42: /BOARDS/BBB_TOW/ti-linux-kernel-dev/qt5/qtbase/include/QtCore/../../src/corelib/global/qglobal.h:121:49: error: static assertion failed: Required feature library for file /BOARDS/BBB_TOW/ti-linux-kernel-dev/qt5/qtbase/include/QtCore/../../src/corelib/plugin/qlibrary.h not available. # define Q_STATIC_ASSERT_X(Condition, Message) static_assert(bool(Condition), Message) ^ /BOARDS/BBB_TOW/ti-linux-kernel-dev/qt5/qtbase/include/QtCore/../../src/corelib/global/qglobal.h:87:36: note: in expansion of macro ‘Q_STATIC_ASSERT_X’ #define QT_REQUIRE_CONFIG(feature) Q_STATIC_ASSERT_X(QT_FEATURE_##feature == 1, "Required feature " #feature " for file " __FILE__ " not available.") ^~~~~~~~~~~~~~~~~ /BOARDS/BBB_TOW/ti-linux-kernel-dev/qt5/qtbase/include/QtCore/../../src/corelib/plugin/qlibrary.h:45:1: note: in expansion of macro ‘QT_REQUIRE_CONFIG’ QT_REQUIRE_CONFIG(library); ^~~~~~~~~~~~~~~~~ Makefile:1354: recipe for target '.obj/qserialportinfo_unix.o' failed make[3]: *** [.obj/qserialportinfo_unix.o] Error 1 make[3]: Leaving directory '/BOARDS/BBB_TOW/ti-linux-kernel-dev/qt5/qtserialport/src/serialport' Makefile:46: recipe for target 'sub-serialport-make_first' failed make[2]: *** [sub-serialport-make_first] Error 2 make[2]: Leaving directory '/BOARDS/BBB_TOW/ti-linux-kernel-dev/qt5/qtserialport/src' Makefile:48: recipe for target 'sub-src-make_first' failed make[1]: *** [sub-src-make_first] Error 2 make[1]: Leaving directory '/BOARDS/BBB_TOW/ti-linux-kernel-dev/qt5/qtserialport' Makefile:211: recipe for target 'module-qtserialport-make_first' failed make: *** [module-qtserialport-make_first] Error 2
Expansion of a Macro ?
I am using
arm-linux-gnueabihf-g++ --version arm-linux-gnueabihf-g++ (Linaro GCC 7.4-2019.02) 7.4.1 20181213 [linaro-7.4-2019.02 revision 56ec6f6b99cc167ff0c2f8e1a2eed33b1edc85d4] Copyright (C) 2017 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
Do I need a newer version ?
... later on...
I used different tool chains and I ran in the same error.
I went over this link tool-chain script setup.
Same error, then finally I tweak the macro in it's header file and now seems to compiling. I ongoing for last 15 minutes or so. -
@comarius said in Project ERROR: Unknown module(s) in QT: quick:
@comarius said in Project ERROR: Unknown module(s) in QT: quick:
The git I cloned has only qtbase. I was not aware that there is another git called qt5. The info is quite scattered all over the place.
Thank you.
Will try...
All good form the configuration point of view.The compilation fails asking for a feature library ?!?
arm-linux-gnueabihf-g++ -c -pipe -march=armv7-a -mtune=cortex-a8 -mfpu=neon -mthumb -fPIC -march=armv7-a -mtune=cortex-a8 -mfpu=neon -mthumb -fPIC -mfloat-abi=hard --sysroot=/BOARDS/BBB_TOW/ti-linux-kernel-dev/deploy/targetNFS -O2 -O3 -std=c++1z -fvisibility=hidden -fvisibility-inlines-hidden -fno-exceptions -Wall -W -Wvla -Wdate-time -Wshift-overflow=2 -Wduplicated-cond -Wno-stringop-overflow -ffunction-sections -fdata-sections -D_REENTRANT -DQT_NO_NARROWING_CONVERSIONS_IN_CONNECT -DQT_BUILD_SERIALPORT_LIB -DQT_BUILDING_QT -DQT_NO_CAST_TO_ASCII -DQT_ASCII_CAST_WARNINGS -DQT_MOC_COMPAT -DQT_USE_QSTRINGBUILDER -DQT_DEPRECATED_WARNINGS -DQT_DISABLE_DEPRECATED_BEFORE=0x050000 -DQT_NO_EXCEPTIONS -D_LARGEFILE64_SOURCE -D_LARGEFILE_SOURCE -DQT_NO_DEBUG -DQT_CORE_LIB -I. -I. -I../../include -I../../include/QtSerialPort -I../../include/QtSerialPort/5.12.4 -I../../include/QtSerialPort/5.12.4/QtSerialPort -I/BOARDS/BBB_TOW/ti-linux-kernel-dev/qt5/qtbase/include/QtCore/5.12.4 -I/BOARDS/BBB_TOW/ti-linux-kernel-dev/qt5/qtbase/include/QtCore/5.12.4/QtCore -I/BOARDS/BBB_TOW/ti-linux-kernel-dev/qt5/qtbase/include -I/BOARDS/BBB_TOW/ti-linux-kernel-dev/qt5/qtbase/include/QtCore -I.moc -I/BOARDS/BBB_TOW/ti-linux-kernel-dev/qt5/qtbase/mkspecs/devices/linux-beagleboard-g++ -o .obj/qserialportinfo_unix.o qserialportinfo_unix.cpp In file included from /BOARDS/BBB_TOW/ti-linux-kernel-dev/qt5/qtbase/include/QtCore/qglobal.h:1:0, from /BOARDS/BBB_TOW/ti-linux-kernel-dev/qt5/qtbase/include/QtCore/../../src/corelib/tools/qalgorithms.h:43, from /BOARDS/BBB_TOW/ti-linux-kernel-dev/qt5/qtbase/include/QtCore/qalgorithms.h:1, from /BOARDS/BBB_TOW/ti-linux-kernel-dev/qt5/qtbase/include/QtCore/../../src/corelib/tools/qlist.h:43, from /BOARDS/BBB_TOW/ti-linux-kernel-dev/qt5/qtbase/include/QtCore/qlist.h:1, from qserialportinfo.h:44, from qserialportinfo_unix.cpp:42: /BOARDS/BBB_TOW/ti-linux-kernel-dev/qt5/qtbase/include/QtCore/../../src/corelib/global/qglobal.h:121:49: error: static assertion failed: Required feature library for file /BOARDS/BBB_TOW/ti-linux-kernel-dev/qt5/qtbase/include/QtCore/../../src/corelib/plugin/qlibrary.h not available. # define Q_STATIC_ASSERT_X(Condition, Message) static_assert(bool(Condition), Message) ^ /BOARDS/BBB_TOW/ti-linux-kernel-dev/qt5/qtbase/include/QtCore/../../src/corelib/global/qglobal.h:87:36: note: in expansion of macro ‘Q_STATIC_ASSERT_X’ #define QT_REQUIRE_CONFIG(feature) Q_STATIC_ASSERT_X(QT_FEATURE_##feature == 1, "Required feature " #feature " for file " __FILE__ " not available.") ^~~~~~~~~~~~~~~~~ /BOARDS/BBB_TOW/ti-linux-kernel-dev/qt5/qtbase/include/QtCore/../../src/corelib/plugin/qlibrary.h:45:1: note: in expansion of macro ‘QT_REQUIRE_CONFIG’ QT_REQUIRE_CONFIG(library); ^~~~~~~~~~~~~~~~~ Makefile:1354: recipe for target '.obj/qserialportinfo_unix.o' failed make[3]: *** [.obj/qserialportinfo_unix.o] Error 1 make[3]: Leaving directory '/BOARDS/BBB_TOW/ti-linux-kernel-dev/qt5/qtserialport/src/serialport' Makefile:46: recipe for target 'sub-serialport-make_first' failed make[2]: *** [sub-serialport-make_first] Error 2 make[2]: Leaving directory '/BOARDS/BBB_TOW/ti-linux-kernel-dev/qt5/qtserialport/src' Makefile:48: recipe for target 'sub-src-make_first' failed make[1]: *** [sub-src-make_first] Error 2 make[1]: Leaving directory '/BOARDS/BBB_TOW/ti-linux-kernel-dev/qt5/qtserialport' Makefile:211: recipe for target 'module-qtserialport-make_first' failed make: *** [module-qtserialport-make_first] Error 2
Expansion of a Macro ?
I am using
arm-linux-gnueabihf-g++ --version arm-linux-gnueabihf-g++ (Linaro GCC 7.4-2019.02) 7.4.1 20181213 [linaro-7.4-2019.02 revision 56ec6f6b99cc167ff0c2f8e1a2eed33b1edc85d4] Copyright (C) 2017 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
Do I need a newer version ?
... later on...
I used different tool chains and I ran in the same error.
I went over this link tool-chain script setup.
Same error, then finally I tweak the macro in it's header file and now seems to compiling. I ongoing for last 15 minutes or so.After few more tweaks I ran into this error. The libdl is on the rootFS in /lib and /usr/lib
marius@pegpc:/BOARDS/BBB_TOW/ti-linux-kernel-dev/qt5/qtdeclarative$ make cd src/ && ( test -e Makefile || /BOARDS/BBB_TOW/ti-linux-kernel-dev/qt5/qtbase/bin/qmake -o Makefile /BOARDS/BBB_TOW/ti-linux-kernel-dev/qt5/qtdeclarative/src/src.pro ) && make -f Makefile make[1]: Entering directory '/BOARDS/BBB_TOW/ti-linux-kernel-dev/qt5/qtdeclarative/src' cd qml/ && ( test -e Makefile || /BOARDS/BBB_TOW/ti-linux-kernel-dev/qt5/qtbase/bin/qmake -o Makefile /BOARDS/BBB_TOW/ti-linux-kernel-dev/qt5/qtdeclarative/src/qml/qml.pro ) && make -f Makefile Project MESSAGE: perl -w /BOARDS/BBB_TOW/ti-linux-kernel-dev/qt5/qtbase/bin/syncqt.pl -module QtQml -version 5.12.4 -outdir /BOARDS/BBB_TOW/ti-linux-kernel-dev/qt5/qtdeclarative -builddir /BOARDS/BBB_TOW/ti-linux-kernel-dev/qt5/qtdeclarative /BOARDS/BBB_TOW/ti-linux-kernel-dev/qt5/qtdeclarative <srcbase> = /BOARDS/BBB_TOW/ti-linux-kernel-dev/qt5/qtdeclarative <bldbase> = /BOARDS/BBB_TOW/ti-linux-kernel-dev/qt5/qtdeclarative <outbase> = /BOARDS/BBB_TOW/ti-linux-kernel-dev/qt5/qtdeclarative Project ERROR: Library 'libdl' is not defined. Makefile:55: recipe for target 'sub-qml-make_first-ordered' failed make[1]: *** [sub-qml-make_first-ordered] Error 3 make[1]: Leaving directory '/BOARDS/BBB_TOW/ti-linux-kernel-dev/qt5/qtdeclarative/src' Makefile:49: recipe for target 'sub-src-make_first' failed make: *** [sub-src-make_first] Error 2
Upon several tweaks in some configuration files taken from this post above error was fixed.
Though now I am running into this error.
cd qml/ && ( test -e Makefile || /BOARDS/BBB_TOW/ti-linux-kernel-dev/qt5/qtbase/bin/qmake -o Makefile /BOARDS/BBB_TOW/ti-linux-kernel-dev/qt5/qtdeclarative/tools/qml/qml.pro ) && make -f Makefile clean sh: 1: /BOARDS/BBB_TOW/ti-linux-kernel-dev/qt5/qtdeclarative/bin/qmlimportscanner: not found /BOARDS/BBB_TOW/ti-linux-kernel-dev/qt5/qtbase/mkspecs/features/qt.prf:285: Error parsing JSON at 1:1: illegal value Project ERROR: Failed to parse qmlimportscanner output. Makefile:158: recipe for target 'sub-qml-clean' failed make[2]: *** [sub-qml-clean] Error 3 make[2]: Leaving directory '/BOARDS/BBB_TOW/ti-linux-kernel-dev/qt5/qtdeclarative/tools' Makefile:80: recipe for target 'sub-tools-clean' failed make[1]: *** [sub-tools-clean] Error 2 make[1]: Leaving directory '/BOARDS/BBB_TOW/ti-linux-kernel-dev/qt5/qtdeclarative' Makefile:305: recipe for target 'module-qtdeclarative-clean' failed make: *** [module-qtdeclarative-clean] Error 2