QList<QVector< . >>: how to reserve
-
Thank you guys.
@Christian-Ehrlicher
In my application N is in the order of few tens. The subvectors may be instead hundreds or thousands of elements, depending on the configuration of the hardware that sends me the data to store/display.
I thought I may have to reserve the list depending on the actual maximum number of bytes it is going to contain.
The size of the vectors can vary, but I would prefer to set a maximum size to avoid my application to take too much memory.@JonB
myList->at(i)->reserve(M); compiles without issues.
I'm actually having some memory issues in my application, but they are probably related to other parts of may code. That's why I opened this topic. -
Thank you guys.
@Christian-Ehrlicher
In my application N is in the order of few tens. The subvectors may be instead hundreds or thousands of elements, depending on the configuration of the hardware that sends me the data to store/display.
I thought I may have to reserve the list depending on the actual maximum number of bytes it is going to contain.
The size of the vectors can vary, but I would prefer to set a maximum size to avoid my application to take too much memory.@JonB
myList->at(i)->reserve(M); compiles without issues.
I'm actually having some memory issues in my application, but they are probably related to other parts of may code. That's why I opened this topic.@Davide87 said in QList<QVector< . >>: how to reserve:
@JonB
myList->at(i)->reserve(M); compiles without issues.@Christian-Ehrlicher could you explain, am I having a mind block? Given it's const T &QList::at(int i) const, doesn't the
const T &prevent me from callingQList::reserve()on it?@Davide87
I still suspectreserve()won't make that much difference, Qt's list/vector allocation will be reasonable even without it. You would have to test.The size of the vectors can vary, but I would prefer to set a maximum size to avoid my application to take too much memory.
I don't think
reserve()will have any effect on the maximum size of the list/vector. That will happen dynamically whether you reserve or not. It's only to do with efficient use of memory during re-allocations as list grows. -
@Davide87 said in QList<QVector< . >>: how to reserve:
@JonB
myList->at(i)->reserve(M); compiles without issues.@Christian-Ehrlicher could you explain, am I having a mind block? Given it's const T &QList::at(int i) const, doesn't the
const T &prevent me from callingQList::reserve()on it?@Davide87
I still suspectreserve()won't make that much difference, Qt's list/vector allocation will be reasonable even without it. You would have to test.The size of the vectors can vary, but I would prefer to set a maximum size to avoid my application to take too much memory.
I don't think
reserve()will have any effect on the maximum size of the list/vector. That will happen dynamically whether you reserve or not. It's only to do with efficient use of memory during re-allocations as list grows.@JonB said in QList<QVector< . >>: how to reserve:
Given it's const T &QList::at(int i) const, doesn't the const T & prevent me from calling QList::reserve() on it?
Because he is working with heap-allocated QList/QVector instances for unknown reaons / he wants to debug memory leaks later on because he forgets to delete them afterwards...
-
@Davide87 said in QList<QVector< . >>: how to reserve:
@JonB
myList->at(i)->reserve(M); compiles without issues.@Christian-Ehrlicher could you explain, am I having a mind block? Given it's const T &QList::at(int i) const, doesn't the
const T &prevent me from callingQList::reserve()on it?@Davide87
I still suspectreserve()won't make that much difference, Qt's list/vector allocation will be reasonable even without it. You would have to test.The size of the vectors can vary, but I would prefer to set a maximum size to avoid my application to take too much memory.
I don't think
reserve()will have any effect on the maximum size of the list/vector. That will happen dynamically whether you reserve or not. It's only to do with efficient use of memory during re-allocations as list grows.@JonB said in QList<QVector< . >>: how to reserve:
@Davide87 said in QList<QVector< . >>: how to reserve:
@JonB
myList->at(i)->reserve(M); compiles without issues.@Christian-Ehrlicher could you explain, am I having a mind block? Given it's const T &QList::at(int i) const, doesn't the
const T &prevent me from callingQList::reserve()on it?It may be because myList is a list of pointers. QList::at(int i) returns a pointer in this case. Therefore ->reserve() works in this case. Maybe.
@Davide87
I still suspectreserve()won't make that much difference, Qt's list/vector allocation will be reasonable even without it. You would have to test.The size of the vectors can vary, but I would prefer to set a maximum size to avoid my application to take too much memory.
I don't think
reserve()will have any effect on the maximum size of the list/vector. That will happen dynamically whether you reserve or not. It's only to do with efficient use of memory during re-allocations as list grows.Ok, thank you. I will test that.
-
@JonB said in QList<QVector< . >>: how to reserve:
@Davide87 said in QList<QVector< . >>: how to reserve:
@JonB
myList->at(i)->reserve(M); compiles without issues.@Christian-Ehrlicher could you explain, am I having a mind block? Given it's const T &QList::at(int i) const, doesn't the
const T &prevent me from callingQList::reserve()on it?It may be because myList is a list of pointers. QList::at(int i) returns a pointer in this case. Therefore ->reserve() works in this case. Maybe.
@Davide87
I still suspectreserve()won't make that much difference, Qt's list/vector allocation will be reasonable even without it. You would have to test.The size of the vectors can vary, but I would prefer to set a maximum size to avoid my application to take too much memory.
I don't think
reserve()will have any effect on the maximum size of the list/vector. That will happen dynamically whether you reserve or not. It's only to do with efficient use of memory during re-allocations as list grows.Ok, thank you. I will test that.
@Davide87 said in QList<QVector< . >>: how to reserve:
It may be because myList is a list of pointers. QList::at(int i) returns a pointer in this case. Therefore ->reserve() works in this case. Maybe.
Ah, yes indeed, I did not notice that. Only the pointer is
constthen, it does not make*const_pointerbeconst:) -
Again: don't use pointers here - they are completely unneeded and will get you in trouble later on when you hunt for memory leaks
-
D Davide87 has marked this topic as solved on
-
@Davide87 said in QList<QVector< . >>: how to reserve:
or should I
myList->reserve(N*M);?No, the
QListandQVectorare quite separate from one another, not related. Any reservations must be done on each one separately, and for the elements of the list which are vectors in each vector individually, as your code does.myList->at(i)->reserve(M);Not sure you will be able to do this (or have you already done it and it compiles)? const T &QList::at(int i) const returns a
constreference to the (QVector) element, so you won't be able to callQList::reserve()on it? Create a temporary for thenew QVector<float>(), callreserve()on that, then add it to yourQList.@JonB said in QList<QVector< . >>: how to reserve:
No, the QList and QVector are quite separate from one another, not related
Not in Qt6
https://code.qt.io/cgit/qt/qtbase.git/tree/src/corelib/tools/qvector.h
you're technically correct in relation to the OP post. And technically correct is the best kind of correct
Be aware of the Qt Code of Conduct, when posting : https://forum.qt.io/topic/113070/qt-code-of-conduct
Q: What's that?
A: It's blue light.
Q: What does it do?
A: It turns blue. -
@JonB said in QList<QVector< . >>: how to reserve:
No, the QList and QVector are quite separate from one another, not related
Not in Qt6
https://code.qt.io/cgit/qt/qtbase.git/tree/src/corelib/tools/qvector.h
you're technically correct in relation to the OP post. And technically correct is the best kind of correct
@J-Hilk
I did not sayQListandQVectorare not related to one another! I said THEQListand THEQVectorin OP'sQList<QVector<float>*> *myList;declaration are unrelated to each other (Qt4, 5, 6 or anything else). The OP asked whether
or should I
myList->reserve(N*M);?where he thinks a list/vector of lists/vectors are "one blob" which can be reserved like that....
-
@J-Hilk
I did not sayQListandQVectorare not related to one another! I said THEQListand THEQVectorin OP'sQList<QVector<float>*> *myList;declaration are unrelated to each other (Qt4, 5, 6 or anything else). The OP asked whether
or should I
myList->reserve(N*M);?where he thinks a list/vector of lists/vectors are "one blob" which can be reserved like that....
@J-Hilk said in QList<QVector< . >>: how to reserve:
you're technically correct in relation to the OP post. And technically correct is the best kind of correct
