I need a qmake for the BeagleBone Black

mzimmers

With a lot of help from SGaist, I was able to successfully build Qt for the BBB, thereby getting the qmake that I needed. Here's a little information on how we got this working:

the build command that finally worked is this:

~/Qt/5.8/Src/qtbase/configure -platform linux-g++ -xplatform linux-arm-gnueabi-g++ -release -device linux-beagleboard-g++ \
  -sysroot /opt/arm-toolchain/sysroot-glibc-linaro-2.23-2016.11-arm-linux-gnueabihf/ \
 -prefix ~/QtForBBB \
-device-option CROSS_COMPILE=/opt/arm-toolchain/gcc-linaro-6.2.1-2016.11-x86_64_arm-linux-gnueabihf/bin/arm-linux-gnueabihf- \
 -qt-xcb \
 -nomake tests -nomake examples -no-opengl

I needed to download the sysroot as well as the toolchain. This wasn't explicit from the directions. Make sure that the two downloads are for the same platform.
it's a good idea to run the configure on an empty directory.
when the configure runs successfully to completion, it will tell you to run make but not make install. My experience was that I had to run make, then run make install, in order to get everything I needed.
I never did find out why that trailing dash ("-") is needed on the pathname for CROSS_COMPILE, but it is indeed necessary.
after you get Qt configured and made, you'll go into Creator (assuming you're using Creator) and create new entries for the compilers (C and C++) and debugger. You'll then use these new entries for a new kit you'll make for the BBB.

Hopefully, this information will help other people who are doing this as their first build. Feel free to ask questions, as I'm sure I missed some things. Thanks again to everyone who assisted.

SGaist

That's because the CROSS_COMPILE value will be used as prefix to call all tools.

Something a bit like:

CC = $${CROSS_COMPILE}gcc

Sajeevan K

Hi all,

I am new to both Qt and Beaglebone Black.
I am trying to make qmake for Beaglebone black.

Mzimmers wrote here: "I needed to download the sysroot as well as toolchain"

Can anybody tell me where from I can download the sysroot.
I have downloaded and installed the the linaro toolchain

Thanks in advance for the help.

Sajeevan.K

mzimmers

Hi, Sajeevan -

Where did you get your cross-development toolchain? If possible, it's probably a good idea to get them from the same location. As the code in my command indicates, I got both from Linaro's site.

Linaro

The toolchain is the 2nd item from the bottom in the list.

Sajeevan K

Hi Mzimmers,

Thank You very much. I have been searching for sysroot everywhere except in Linaro sight!!

Sajeevan.K

Dario

@mzimmers
Hi, maybe can you send me the procedure that you follow to set-up it?

regards

mzimmers

Hi, Dario -

What exactly are you looking for? Post 14 in this topic outlines the steps to get a qmake you can use with the Beaglebone. Let me know if you need more detail on a particular step.

Dario

@mzimmers I am really new in this.
I trying to configure Qt to use with the Beaglebone by Cross-compile
I followed some step from several tutorials, but some links are down or are so old, and I get some errors.
I want to compile QT 5.8 because I need to use the Modbus library, But I dont know how to start to set up
1.- I have a computer where I have installed Ubuntu 16.04 on a virtual machine using virtualbox.
2.- I downloaded the lasted toolchain and the sysroot from linaro
What are the next step in detail?
My Beaglebone has the lasted image from the oficial page Debian 8.7 2017-03-19 4GB SD LXQT

I'm sorry for my English, I'm a Spanish speaker.

mzimmers

Hi, Dario -

Unfortunately, I had to rebuild my system this weekend, so I don't have an active BBB configuration right now. If you have the toolchain and sysroot, the next step is to build qmake for BBB. Use the configure command I listed in post #13 in this thread, and then make and make install.

When I get to rebuilding my BBB configuration, I'll be happy to help you more, but it's not a high priority, so it may take me some time.

sxr3455

@mzimmers Hi, would you be able to share the changes you made to qmake.conf? I'm trying to build 5.8 using your instructions above.

mzimmers

@sxr3455 I'd like to help, but I haven't touched my BBB in over 3 years, and I can't even find my old work, so I'm afraid I can't help much.

Did you look at this page?

It's out of date, but I recall it being helpful. Good luck.

sxr3455

@mzimmers I am not able to access the link. Do you have a proper working link?

jsulm

@sxr3455 If you take a closer look at the link @mzimmers posted you will see that there is a typo. Here is correct and working link:
https://sites.google.com/site/timpicuc/Downhome/beaglebone-black/setting-up-qt-for-bbb-with-debian

mzimmers

@jsulm doh...that's what happens when I'm rushing. Link is fixed in my post; thanks for catching it, jsulm.