Serial port Communication with pc through serial Adapter

sankarapandiyan

@J-Hilk said in Serial port Communication with pc through serial Adapter:

void MainWindow::serialReceived()

{
QString glen = serial->readAll();
if (glen.length()>0){
/QString/ line = ui->receive->toPlainText();
ui->receive->setText(ui->receive->toPlainText()+line+"\n");
ui->receive->setText(line + "\r\n" + glen + "\r\n");
line = txt3;
}
QMetaObject::invokeMethod(this, &MainWindow::checkAndSendData, Qt::QueuedConnection);
}

I Have tried this my output is same like this

alternate text
this is my code is there is any problem in my code

#include "mainwindow.h"
#include "ui_mainwindow.h"
#include <QList>
#include <QComboBox>
#include <QString>
#include <QTextEdit>
#include <QTime>
#include <QDebug>
#include <QtSerialPort/QSerialPortInfo>
#include <QtSerialPort>
#include <QFile>
#include <QList>

  QString line ;
  QString txt3;
QSerialPort *serial;
QStringList m_lines;
//QByteArray rawData;


MainWindow::MainWindow(QWidget *parent)
    : QMainWindow(parent)
    , ui(new Ui::MainWindow)
{

    ui->setupUi(this);

    QString filename1="/home/adx-soft1/Shankar/serial/myfile1.txt";
      QFile file(filename1);
      if(!file.exists()){
          qDebug() << "NO FILE "<<filename1;
      }else{
          qDebug() << filename1<<" ...";
      }
      QString line1;
      ui->sender->clear();
      if (file.open(QIODevice::ReadOnly | QIODevice::Text)){ ui->sender->setText(file.readAll()); }

    QList<QSerialPortInfo> list;
    list = QSerialPortInfo::availablePorts();

    for (int i= 0; i < list.length(); i++)
    {
        ui->comboBox->addItem(list[i].portName());

    }
}

MainWindow::~MainWindow()
{
    delete ui;
    serial->close();
}


void MainWindow::on_pushButton_clicked()
{
    serial = new QSerialPort (this) ;
    serial->setPortName(ui->comboBox->currentText());
    serial->setBaudRate (QSerialPort::Baud115200);
    serial->setDataBits(QSerialPort::Data8);
    serial->setParity (QSerialPort::NoParity);
    serial->setStopBits (QSerialPort::OneStop);
    serial->setFlowControl(QSerialPort::NoFlowControl);
    serial->open(QIODevice::ReadWrite);
    connect(serial,SIGNAL(readyRead()),this, SLOT (serialReceived()));
//    connect(serial, &QSerialPort::readyRead,this, &MainWindow::serialReceived);

   ui->progressBar->setValue(100);
//    ui->receive->clear();
}

void MainWindow::checkAndSendData()
{
    if(!m_lines.isEmpty()){
        QByteArray inBytes;
        QByteArray baToSend = m_lines.takeFirst().toUtf8();
        serial->write(baToSend);
        ui->aknowmnt->setText("Sent Message -->" "\n"+ QString(baToSend) + "\n");
    } else {
        ui->aknowmnt->setText("Receiving ");
    }
}

void MainWindow::on_send_clicked()
{
     line   = ui->sender->toPlainText();
    QString txt1 = ui->receive->toPlainText();
    /*QString*/ txt3 = ui->aknowmnt->toPlainText();

     if(m_lines.isEmpty()){
    QFile inputFile(QString("/home/adx-soft1/Shankar/serial/myfile1.txt"));
    inputFile.open(QIODevice::ReadOnly);
    if (!inputFile.isOpen())
        return;

    QTextStream stream(&inputFile);
    while (!stream.atEnd()){
            line = stream.readLine();
            m_lines.append(line+QString("\r\n"));
    }

     }
     checkAndSendData();

}
void MainWindow::serialReceived()

{

    QString glen = serial->readAll();
    if (glen.length()>0){
    /*QString*/ line = ui->receive->toPlainText();
    ui->receive->setText(ui->receive->toPlainText()+line+"\n");
    ui->receive->setText(line + "\r\n" + glen + "\r\n");
    line = txt3;
    }
   checkAndSendData();
   QMetaObject::invokeMethod(this, &MainWindow::checkAndSendData, Qt::QueuedConnection);

}

But I have not get the correct output @J-Hilk

small_bird

@sankarapandiyan check your encode function

sankarapandiyan

@small_bird Encode function means What you mean ? i didnt get you

J.Hilk

@sankarapandiyan
ok, lets simplify your code, I assume receive and aknowmntare QTextEdits or QTextBrowser, since they have a toPlainTextfunction

void MainWindow::checkAndSendData()
{
    if(!m_lines.isEmpty()){
        QByteArray baToSend = m_lines.takeFirst().toUtf8();
        serial->write(baToSend);
        ui->aknowmnt->append("Sent Message --> "+ QString(baToSend));
    } else {
        ui->aknowmnt->append("All are send ");
    }
}

void MainWindow::serialReceived()

{
    QString glen = serial->readAll();
    if (glen.length()>0){
         ui->receive->append( "Received -->" + QString(glen));
    }
   QMetaObject::invokeMethod(this, &MainWindow::checkAndSendData, Qt::QueuedConnection);

}

sankarapandiyan

@J-Hilk

Yes i have tried this method , the correct data is not shown in the receiver side ..

alternate text

void MainWindow::on_pushButton_clicked()
{
    serial = new QSerialPort (this) ;
    serial->setPortName(ui->comboBox->currentText());
    serial->setBaudRate (QSerialPort::Baud115200);
    serial->setDataBits(QSerialPort::Data8);
    serial->setParity (QSerialPort::NoParity);
    serial->setStopBits (QSerialPort::OneStop);
    serial->setFlowControl(QSerialPort::NoFlowControl);
    serial->open(QIODevice::ReadWrite);
//    connect(serial,SIGNAL(readyRead()),this, SLOT (serialReceived()));
    connect(serial, &QSerialPort::readyRead,this, &MainWindow::serialReceived);

   ui->progressBar->setValue(100);
//    ui->receive->clear();
}

void MainWindow::checkAndSendData()
{
    if(!m_lines.isEmpty()){
        QByteArray baToSend = m_lines.takeFirst().toUtf8();
        serial->write(baToSend);
        ui->aknowmnt->append("Sent Message --> "+ QString(baToSend));
    } else {
        ui->aknowmnt->append("All are send ");
    }
}

void MainWindow::on_send_clicked()
{
     line   = ui->sender->toPlainText();
    QString txt1 = ui->receive->toPlainText();
    /*QString*/ txt3 = ui->aknowmnt->toPlainText();

     if(m_lines.isEmpty()){
    QFile inputFile(QString("/home/adx-soft1/Shankar/serial/myfile1.txt"));
    inputFile.open(QIODevice::ReadOnly);
    if (!inputFile.isOpen())
        return;

    QTextStream stream(&inputFile);
    while (!stream.atEnd()){
            line = stream.readLine();
            m_lines.append(line+QString("\r\n"));
    }

     }
     checkAndSendData();

}

void MainWindow::serialReceived()

{
    QString glen = serial->readAll();
    if (glen.length()>0){
         ui->receive->append( "Received -->" + QString(glen));
    }
   QMetaObject::invokeMethod(this, &MainWindow::checkAndSendData, Qt::QueuedConnection);
}

sankarapandiyan

@J-Hilk said in Serial port Communication with pc through serial Adapter:

ok, lets simplify your code, I assume receive and aknowmntare QTextEdits or QTextBrowser, since they have a toPlainTextfunction

Yes Its a QTextEdits

J.Hilk

@sankarapandiyan
you're obviously receiving non ascii bytes

void MainWindow::serialReceived()

{
    QByteArray glen = serial->readAll();
    if (glen.length()>0){
         ui->receive->append( QString("Received --> %1").arg(QString(glen.toHex(' ')));
    }
   QMetaObject::invokeMethod(this, &MainWindow::checkAndSendData, Qt::QueuedConnection);

}

sankarapandiyan

@J-Hilk said in Serial port Communication with pc through serial Adapter:

void MainWindow::serialReceived()

{
QByteArray glen = serial->readAll();
if (glen.length()>0){
ui->receive->append( QString("Received --> %1").arg(QString(glen.toHex(' ')));
}
QMetaObject::invokeMethod(this, &MainWindow::checkAndSendData, Qt::QueuedConnection);

}

this out put is what i receive from another pc
alternate text
And the next below image is shown as a data send as some thing different

alternate text

Even Now also i did not get the exact output sir what should i do i am stuck here .. @J-Hilk

KroMignon

@sankarapandiyan Maybe it is a silly question, but are you sure the serial settings your are using, are correct?

115200 bauds?
8 bits?

Are you using a crossed/null modem serial cable? ==> cf https://en.wikipedia.org/wiki/Null_modem.

sankarapandiyan

@KroMignon I am Using hl-340 usb-serial adapter . so here , what i want to give as a baud rate.

void MainWindow::on_pushButton_clicked()
{
    serial = new QSerialPort (this) ;
    serial->setPortName(ui->comboBox->currentText());
    serial->setBaudRate (QSerialPort::Baud115200);
    serial->setDataBits(QSerialPort::Data8);
    serial->setParity (QSerialPort::NoParity);
    serial->setStopBits (QSerialPort::OneStop);
    serial->setFlowControl(QSerialPort::NoFlowControl);
    serial->open(QIODevice::ReadWrite);
    connect(serial,SIGNAL(readyRead()),this, SLOT (serialReceived()));
    ui->progressBar->setValue(100);
//    ui->receive->clear();
}

KroMignon

@sankarapandiyan said in Serial port Communication with pc through serial Adapter:

I am Using hl-340 usb-serial adapter

Okay, that's for having a RS232 port on you PC, but to connect two PC you need a "null modem" cable (to cross Tx and Rx signal between the 2 serial ports).
Have you something like this?

sankarapandiyan

@KroMignon Yes you are right ..
this is my null modem i am using
alternate text

I dontknow i am ryt or wrong and i am new to this topic .. the above image shows my serial adapter with null modem

KroMignon

@sankarapandiyan Okay, so the hardware side seems to be right. Can you give your software environnement:

Operation system you are using (Linux ? Windows? MacOS?)
Qt Kit Version you are using (not Qt Creator version!)

sankarapandiyan

@KroMignon

Operation system you are using (Linux ? Windows? MacOS?)
Linux_Ubuntu18.04.3
Qt Kit Version you are using (not Qt Creator version!)
**I dont know how to find the Qt kit version but any way little bit i have find out i think ..the below image shows the version of kit ** @KroMignon

alternate text

KroMignon

@sankarapandiyan said in Serial port Communication with pc through serial Adapter:

Linux_Ubuntu18.04.3

Have you tried your serial interface with another tool like cutecom.
On Ubuntu/Debian, you can install it with apt-get install cutecom

sankarapandiyan

@KroMignon

YEs I have done its working in the application ... @KroMignon

alternate text