How to set up RPi WiringPi library and other libs for Qt cross-compile

[Pablo J. Rogina]

@robopoulos couple of things I can see quickly:

1. You have Wiring Pi installed in a bunch of different locations in your RPi device. I understand that you should have it installed under /usr/lib (.so) and /usr/include (.h) only. Those are the locations that you then sync

rsync -avz pi@raspberrypi.local:/usr/include sysroot/usr
rsync -avz pi@raspberrypi.local:/usr/lib sysroot/usr

2. You don't need both wiringPi and wiringPiDev shared libraries unless you're using the Gertboard, MaxDetect, etc. see here

NOTE: To compile programs with wiringPi, you need to add:
-lwiringPi
to your compile line(s) To use the Gertboard, MaxDetect, etc.
code (the devLib), you need to also add:
-lwiringPiDev
to your compile line(s).

so this fragment from your .pro

INCLUDEPATH += /home/ri/raspi2/sysroot/usr/lib/
INCLUDEPATH += /home/ri/raspi2/sysroot/usr/include/

LIBS += -L"/home/ri/raspi2/sysroot/usr/include" -libwiringPi.so
LIBS += -L"/home/ri/raspi2/sysroot/usr/include" -libwiringPiDev.so
LIBS += -lwiringPi -lwiringPiDev

should change into:

INCLUDEPATH += /home/ri/raspi2/sysroot/usr/include/

LIBS += -L"/home/ri/raspi2/sysroot/usr/lib"
LIBS += -lwiringPi

PS. If I get this to work I also need to be able to use RPi's serial interface

You may want to take a look at the simplified serial port handling library included in WiringPi.

[robopoulos]

Thanks! As seen from the listings the libs were already in the proper folders. Then after you fixed the .pro the -lwiringPi still wasn't found so I inspected the files with Filezilla on RPi and it revealed that the .so files synced to the host were just but links(!) pointing to the to the original wiringPi build folder. I copied the actual .so files from the original build file to the host and now it works!

THANX!

I mark this as solved. Perhaps I start a new topic if I need help for the serial Arduino connection.

[Pablo J. Rogina]

@robopoulos said in How to set up RPi WiringPi library and other libs for Qt cross-compile:

Glad you solved your issue.

Perhaps I start a new topic if I need help for the serial Arduino connection.

Yes please. Keep the forum tidy, one subject per post so other users can find help easier

[barath.19.2]

@Pablo J. Rogina I was setting up my ubuntu for cross compilation when including the wiringPi.h header file in the .pro file like this

INCLUDEPATH += /usr/local/include

LIBS += -L"/usr/local/lib" -lwiringpi

i got an error

can you please help me out

[jsulm]

@barath-19-2 Did you install the lib in /usr/local/lib? Is the lib there?
Also, what is the exact file name of the lib?
And it looks like you're not doing cross-compalation?

[barath.19.2]

@jsulm
here is a screen-shot of the directory

and this is the header file i downloaded from the unofficial git hub mirror because official was unavailable

after doing ./build i did same told in the previous conversations of this topic to do it the header file got included the header files and functions come in auto-complete when codding but this error pops up while building

[barath.19.2]

@jsulm I used flash boot to QT Device to flash my SD card for Raspberry Pi to upload their Boot to Qt into SD card as showed in qthelp://io.qt.b2qt.598/b2qt/qtee-preparing-hardware-rasberrypi.html#2-installing-boot-to-qt-software-stack after this I thought i could cross-compile but when ran the example in it. It ran with no errors

[jsulm]

@barath-19-2 It's apparently wiringPi not wiringpi...

[barath.19.2]

@jsulm tnx it is now saying file format is not recognized

[jsulm]

@barath-19-2 I asked before: "And it looks like you're not doing cross-compalation?"
So, are you doing cross-compilation?
The wiringPi library is apparently not compatible with your platform.
If you build on your PC/Laptop for Raspberry Pi you have to do cross compilation as Raspberry Pi is ARM and not x86.
So, did you set up a cross compilation environment?