Unsolved make[1]: *** [makefile:1624: obj/release/pcre_exec.o] Error 1
-
i tried on both workstation and beaglebone also but didn't response. Ok i will try it once again.
Nearly How much space(Memory) for this operation is required in my workstation(system).
thank you. -
@Sekhar said in make[1]: *** [makefile:1624: obj/release/pcre_exec.o] Error 1:
Nearly How much space(Memory) for this operation
Depends on the size of the device partition.
Did you make sure you're using correct IP address? -
@jsulm
Thanks for your vlauble time to spent with my problems solving.
that image file copied in my /opt/ folder.now I am trying to do next step: mount that image, but it shows an error message like
in my vertual system had remaing 2GB space only, after copied this image file. that image file takes nearly 16GB.
-
@Sekhar said in make[1]: *** [makefile:1624: obj/release/pcre_exec.o] Error 1:
in my vertual system had remaing 2GB
If it is a virtual system you can resize the virtual hard disk and then resize the partition in your virtual system.
Regarding mount issue: try to specify file system type using -t parameter (use same file system type used on your device).
-
As i was installed Ubuntu 19.04 and i would bi tried these steps mentioned in the document [https://wiki.qt.io/BeagleBone_Black_Beginners_Guide](link url)
but at the 3 point(Preparing workstation) i got an error.... like
and if i was followed another documentation [http://thoughtwaves.com/?p=50](link url) and i got an error like
i was struggled last 2 months for interfacing QT with Beaglebone Black.
my intention is to developing and run a basic QT application on my BeagleBone Black board.could you please tell me how can i slove this error.
-
Start by stopping mixing Qt 4 and Qt 5 instruction sets.
Follow the Qt wiki instructions and only these.
-
@SGaist
if i was followed QT wiki instructions i got an error at the time of mount an image.already asked is same query in the above conversation but some one told to specify the file system type using -t parameter
that's why i am using -o and -tis there any other way to mount that iso. file. for move on next steps...
-
@Sekhar If you would post your console output as text, we could easily modify it and send it back to you. But as pic, that's impossible.
So just a rought template, the syntax is:
mount -t <filesystem-type> -o loop,<other parameters> <file.img> </path/to/mountpoint>
Regards
-
@aha_1980
thank you... it will working... -
If i was tried to create a make file
by following the Qt-wiki document i got an error..... in
7.Compiling qtbase (Qt 5.7)In file included from /mnt/bbb-rootfs/usr/include/openssl/crypto.h:31:0,
from /mnt/bbb-rootfs/usr/include/openssl/comp.h:16,
from /mnt/bbb-rootfs/usr/include/openssl/ssl.h:47,
from ../../include/QtNetwork/5.7.1/QtNetwork/private/../../../../../src/network/ssl/qsslcontext_openssl_p.h:59,
from ../../include/QtNetwork/5.7.1/QtNetwork/private/qsslcontext_openssl_p.h:1,
from ssl/qsslsocket_p.h:61,
from ssl/qsslsocket_openssl_p.h:69,
from ssl/qsslsocket_openssl_symbols_p.h:70,
from ssl/qsslcertificate_openssl.cpp:41:
/mnt/bbb-rootfs/usr/include/openssl/ossl_typ.h:119:16: error: forward declaration of 'X509 {aka struct x509_st}'
typedef struct x509_st X509;
^
ssl/qsslcertificate_openssl.cpp: In member function 'QByteArray QSslCertificate::version() const':
ssl/qsslcertificate_openssl.cpp:93:68: error: invalid use of incomplete type 'X509 {aka struct x509_st}'
QByteArray::number(qlonglong(q_ASN1_INTEGER_get(d->x509->cert_info->version)) + 1);
^
In file included from /mnt/bbb-rootfs/usr/include/openssl/crypto.h:31:0,
from /mnt/bbb-rootfs/usr/include/openssl/comp.h:16,
from /mnt/bbb-rootfs/usr/include/openssl/ssl.h:47,
from ../../include/QtNetwork/5.7.1/QtNetwork/private/../../../../../src/network/ssl/qsslcontext_openssl_p.h:59,
from ../../include/QtNetwork/5.7.1/QtNetwork/private/qsslcontext_openssl_p.h:1,
from ssl/qsslsocket_p.h:61,
from ssl/qsslsocket_openssl_p.h:69,
from ssl/qsslsocket_openssl_symbols_p.h:70,
from ssl/qsslcertificate_openssl.cpp:41:
/mnt/bbb-rootfs/usr/include/openssl/ossl_typ.h:119:16: error: forward declaration of 'X509 {aka struct x509_st}'
typedef struct x509_st X509;
^
ssl/qsslcertificate_openssl.cpp: In member function 'QByteArray QSslCertificate::serialNumber() const':
ssl/qsslcertificate_openssl.cpp:102:45: error: invalid use of incomplete type 'X509 {aka struct x509_st}'
ASN1_INTEGER *serialNumber = d->x509->cert_info->serialNumber;
^
In file included from /mnt/bbb-rootfs/usr/include/openssl/crypto.h:31:0,
from /mnt/bbb-rootfs/usr/include/openssl/comp.h:16,
from /mnt/bbb-rootfs/usr/include/openssl/ssl.h:47,
from ../../include/QtNetwork/5.7.1/QtNetwork/private/../../../../../src/network/ssl/qsslcontext_openssl_p.h:59,
from ../../include/QtNetwork/5.7.1/QtNetwork/private/qsslcontext_openssl_p.h:1,
from ssl/qsslsocket_p.h:61,
from ssl/qsslsocket_openssl_p.h:69,
from ssl/qsslsocket_openssl_symbols_p.h:70,
from ssl/qsslcertificate_openssl.cpp:41:
/mnt/bbb-rootfs/usr/include/openssl/ossl_typ.h:119:16: error: forward declaration of 'X509 {aka struct x509_st}'
typedef struct x509_st X509;
^
ssl/qsslcertificate_openssl.cpp: In member function 'QSslKey QSslCertificate::publicKey() const':
ssl/qsslcertificate_openssl.cpp:238:32: error: invalid use of incomplete type 'X509 {aka struct x509_st}'
X509_PUBKEY *xkey = d->x509->cert_info->key;
^
In file included from /mnt/bbb-rootfs/usr/include/openssl/crypto.h:31:0,
from /mnt/bbb-rootfs/usr/include/openssl/comp.h:16,
from /mnt/bbb-rootfs/usr/include/openssl/ssl.h:47,
from ../../include/QtNetwork/5.7.1/QtNetwork/private/../../../../../src/network/ssl/qsslcontext_openssl_p.h:59,
from ../../include/QtNetwork/5.7.1/QtNetwork/private/qsslcontext_openssl_p.h:1,
from ssl/qsslsocket_p.h:61,
from ssl/qsslsocket_openssl_p.h:69,
from ssl/qsslsocket_openssl_symbols_p.h:70,
from ssl/qsslcertificate_openssl.cpp:41:
/mnt/bbb-rootfs/usr/include/openssl/ossl_typ.h:119:16: error: forward declaration of 'X509 {aka struct x509_st}'
typedef struct x509_st X509;
^
ssl/qsslcertificate_openssl.cpp:242:29: error: invalid use of incomplete type 'EVP_PKEY {aka struct evp_pkey_st}'
if (q_EVP_PKEY_type(pkey->type) == EVP_PKEY_RSA) {
^
In file included from /mnt/bbb-rootfs/usr/include/openssl/crypto.h:31:0,
from /mnt/bbb-rootfs/usr/include/openssl/comp.h:16,
from /mnt/bbb-rootfs/usr/include/openssl/ssl.h:47,
from ../../include/QtNetwork/5.7.1/QtNetwork/private/../../../../../src/network/ssl/qsslcontext_openssl_p.h:59,
from ../../include/QtNetwork/5.7.1/QtNetwork/private/qsslcontext_openssl_p.h:1,
from ssl/qsslsocket_p.h:61,
from ssl/qsslsocket_openssl_p.h:69,
from ssl/qsslsocket_openssl_symbols_p.h:70,
from ssl/qsslcertificate_openssl.cpp:41:
/mnt/bbb-rootfs/usr/include/openssl/ossl_typ.h:93:16: error: forward declaration of 'EVP_PKEY {aka struct evp_pkey_st}'
typedef struct evp_pkey_st EVP_PKEY;
^
ssl/qsslcertificate_openssl.cpp:246:36: error: invalid use of incomplete type 'EVP_PKEY {aka struct evp_pkey_st}'
} else if (q_EVP_PKEY_type(pkey->type) == EVP_PKEY_DSA) {
^
In file included from /mnt/bbb-rootfs/usr/include/openssl/crypto.h:31:0,
from /mnt/bbb-rootfs/usr/include/openssl/comp.h:16,
from /mnt/bbb-rootfs/usr/include/openssl/ssl.h:47,
from ../../include/QtNetwork/5.7.1/QtNetwork/private/../../../../../src/network/ssl/qsslcontext_openssl_p.h:59,
from ../../include/QtNetwork/5.7.1/QtNetwork/private/qsslcontext_openssl_p.h:1,
from ssl/qsslsocket_p.h:61,
from ssl/qsslsocket_openssl_p.h:69,
from ssl/qsslsocket_openssl_symbols_p.h:70,
from ssl/qsslcertificate_openssl.cpp:41:
/mnt/bbb-rootfs/usr/include/openssl/ossl_typ.h:93:16: error: forward declaration of 'EVP_PKEY {aka struct evp_pkey_st}'
typedef struct evp_pkey_st EVP_PKEY;
^
ssl/qsslcertificate_openssl.cpp:251:36: error: invalid use of incomplete type 'EVP_PKEY {aka struct evp_pkey_st}'
} else if (q_EVP_PKEY_type(pkey->type) == EVP_PKEY_EC) {
^
In file included from /mnt/bbb-rootfs/usr/include/openssl/crypto.h:31:0,
from /mnt/bbb-rootfs/usr/include/openssl/comp.h:16,
from /mnt/bbb-rootfs/usr/include/openssl/ssl.h:47,
from ../../include/QtNetwork/5.7.1/QtNetwork/private/../../../../../src/network/ssl/qsslcontext_openssl_p.h:59,
from ../../include/QtNetwork/5.7.1/QtNetwork/private/qsslcontext_openssl_p.h:1,
from ssl/qsslsocket_p.h:61,
from ssl/qsslsocket_openssl_p.h:69,
from ssl/qsslsocket_openssl_symbols_p.h:70,
from ssl/qsslcertificate_openssl.cpp:41:
/mnt/bbb-rootfs/usr/include/openssl/ossl_typ.h:93:16: error: forward declaration of 'EVP_PKEY {aka struct evp_pkey_st}'
typedef struct evp_pkey_st EVP_PKEY;
^
ssl/qsslcertificate_openssl.cpp:256:36: error: invalid use of incomplete type 'EVP_PKEY {aka struct evp_pkey_st}'
} else if (q_EVP_PKEY_type(pkey->type) == EVP_PKEY_DH) {
^
In file included from /mnt/bbb-rootfs/usr/include/openssl/crypto.h:31:0,
from /mnt/bbb-rootfs/usr/include/openssl/comp.h:16,
from /mnt/bbb-rootfs/usr/include/openssl/ssl.h:47,
from ../../include/QtNetwork/5.7.1/QtNetwork/private/../../../../../src/network/ssl/qsslcontext_openssl_p.h:59,
from ../../include/QtNetwork/5.7.1/QtNetwork/private/qsslcontext_openssl_p.h:1,
from ssl/qsslsocket_p.h:61,
from ssl/qsslsocket_openssl_p.h:69,
from ssl/qsslsocket_openssl_symbols_p.h:70,
from ssl/qsslcertificate_openssl.cpp:41:
/mnt/bbb-rootfs/usr/include/openssl/ossl_typ.h:93:16: error: forward declaration of 'EVP_PKEY {aka struct evp_pkey_st}'
typedef struct evp_pkey_st EVP_PKEY;
^
ssl/qsslcertificate_openssl.cpp: In function 'uint qHash(const QSslCertificate&, uint)':
ssl/qsslcertificate_openssl.cpp:73:1: warning: control reaches end of non-void function [-Wreturn-type]
}
^
make[2]: *** [Makefile:20795: .obj/qsslcertificate_openssl.o] Error 1
make[2]: Leaving directory '/opt/qt5bbb/qt5/qtbase/src/network'
make[1]: *** [Makefile:236: sub-network-make_first] Error 2
make[1]: Leaving directory '/opt/qt5bbb/qt5/qtbase/src'
make: *** [Makefile:47: sub-src-make_first] Error 2could you please tell me how can i solve that errors.....
thank you -
Are you trying to build Qt 5.7 using OpenSSL 1.1 ?
If so that won't work. Either use OpenSSL 1.0 or update Qt to version that is current. -
@SGaist
If i was try to use openSSL 1.0 & openSSL 1.1 it doesn't configureit will shows an error "-openssl1.O: invalid command-line switch
" or "1.O: unknown argument"
same error for both openSSL 1.0 & openSSL 1.1 -
@Sekhar There is no such parameter. You just need to use OpenSSL 1.0 header files and libs.
-
by following the Qt-wiki document i got an error
at the time of Run an application...................How to resolve this problem............
Starting /opt/untitled/bin/untitled....
This application failed to start because it could not find or load the Qt platform plugin "eglfs"
in "".
Available platform plugins are: linuxfb, minimal, offscreen.
Reinstalling the application may fix this problem.
Process killed by signal -
@Sekhar Did you properly deploy your app (including plug-ins)?
-
@jsulm
could you please tell me how to including plug-ins -
@Sekhar Please take a look at https://doc.qt.io/qt-5/linux-deployment.html
But your issue could be different: did you cross compile Qt with EGLFS support?